{"id":703,"date":"2022-03-30T03:43:40","date_gmt":"2022-03-30T03:43:40","guid":{"rendered":"https:\/\/www.superlightingled.com\/blog\/?p=703"},"modified":"2024-09-11T09:25:09","modified_gmt":"2024-09-11T09:25:09","slug":"how-to-connect-cob-led-strip-lights","status":"publish","type":"post","link":"https:\/\/www.superlightingled.com\/blog\/how-to-connect-cob-led-strip-lights\/","title":{"rendered":"How To Connect COB LED Strip Lights?"},"content":{"rendered":"\n

This article introduces the related wiring knowledge of LED COB light strips, so as to avoid you being overwhelmed when you encounter the same problems during the installation.<\/p>\n\n\n\n

\n
<\/div>\n<\/div>\n\n\n\n

Fast Article Guide: <\/strong><\/p>\n\n\n\n

    \n
  1. How To Cut COB LED Strips?<\/a><\/li>\n\n\n\n
  2. How To Connect COB LED Strips After Cutting?<\/a><\/li>\n\n\n\n
  3. How To Choose The Right Solderless COB LED Connector?<\/a><\/li>\n\n\n\n
  4. How To Power COB LED Strip Lights?<\/a><\/li>\n<\/ol>\n\n\n\n
    \n
    <\/div>\n<\/div>\n\n\n\n
    \n
    <\/div>\n<\/div>\n\n\n\n

    How To Cut COB LED Strips?<\/strong><\/h2>\n\n\n\n

    There are only two points to pay attention to when cutting COB led strip lights.<\/p>\n\n\n\n

    One is to align the cutting line. The COB led strip<\/a> is composed of multiple circuits in parallel, so the failure of one circuit will not affect other circuits. Each clipping region is a loop. <\/p>\n\n\n\n

    \"\"<\/figure>
    \n

    For example, you can cut 12 COB led lights for a 12V COB led light strip at a time, and these 12 COB lights are a series circuit (Chip On Board technology makes the led strip integrate more LED chips). <\/p>\n\n\n\n

    Therefore, if you cut to the led COB lights loop, the loop will be damaged and the led COB lighting will not light up.<\/p>\n<\/div><\/div>\n\n\n\n

    The second point is to be neat when cutting, don’t cut it crookedly, because this is also likely to cut the loop and you will lose a section of COB LEDs.<\/p>\n\n\n\n

    \n
    <\/div>\n<\/div>\n\n\n\n
    \n
    <\/div>\n<\/div>\n\n\n\n
    \n
    <\/div>\n<\/div>\n\n\n\n

    How To Connect COB LED Strips After Cutting?<\/strong><\/h2>\n\n\n\n

    In the LED project, I got an appropriate installation length after cutting, but the COB led lighting strip after cutting has no wires to connect the led controller and power supply, or I don’t know how to connect another COB led strip light together, what should I do? At this point, you can use solderless COB led connectors or choose to solder.<\/p>\n\n\n\n

    \n
    <\/div>\n<\/div>\n\n\n\n

    2.1. How to connect two COB led strips together through a solderless connector?<\/strong><\/h3>\n\n\n\n
    \n
    \n
    \n