| Select Emitting Color: | Warm White (2800-3200K) (Base) |
|---|---|
| Select Kit: | LED Strips + Controller + Power Supply, LED Strip + Bluetooth Controller SP107E, LED Strip (Base) |
| Select Length: | 16.4ft (5 meters) (Base) |
| Select PCB Color : | White Background (Base), Black Background (Base) |
| Select PCB Width: | 10mm (0.39in) (Base) |
| Select Waterproof Rating: | Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets, Underwater IP68 - With Brackets |
| Availability | In Stock |
| Condition | Brand New |
This APA102 Warm White DC5V 30 LEDs/m Led Programmable Lights with pure color, 5050 warm white FPC board on the back of 3M glue, easy to install low energy consumption, high brightness, The performance is stable and can do waterproof processing unique line technology and high standards of anti-static, to ensure the life of the light bar and the use of quality with plastic deck, easy to install seismic, maintenance-free normal life of 50,000 hours or more Applications: Decor, pool, disco, bar, karaoke and other atmosphere lighting, fashion lighting.
APA102 Chips Specifications Download 
Standards and Certifications
Specifications
Input voltage: DC5V
Power: 9watt/meter,45watt/roll
LED resource: SMD 5050 LED
Q'ty of LED: 30 leds/meter,150 leds/roll, each LED is separately controlled
IC Type: APA102
Q'ty of IC: 30IC/meter (1 IC drives 1 led chip)
Pixels: 30/meter
Grey scale: 256
Bits/color: 8-bits/color;24bit for RGB
FPC size: Width: 10mm, High: 3mm
Certification: CE,FCC,GS,SAA,RoHS,CCC
Color Temp(K): Warm White
LED Chip Model: SMD5050
Strip type: SMD
FPC color: WHITE /BLACK PCB
Protection rate: NON-waterproof; IP65; IP67
Colors: Warm white
Cuttable: every LED is cuttable
Package: 5meters/reel in anti-static bag;with adhensive tape on the back
Average Life (hrs): 50000Hours+
How to connect and control
The APA102 led strip has 4 wires for sending data - one V+ pin, one GND pin, one data pin, and one clock pin. That means you need 4 pins to control strip. Because the data is seperated, you can use any processor speed or type to control these strips. an addressable Warm white LED strip is a long flexible strand of LEDs each of which can be individually set to a certain color (hence: addressable). You can use any processor speed or type to control these strips, you can use any microcontroller or microprocessor, including Arduino, Raspberry Pi, BeagleBone, Propeller, SparkCore, and any 'raw' microcontrollers/microprocessors to control the strip.
This strip comes as a single full meter with a 4-pin JST SM connector on each end. Every LEDs segment can be cut. Solder to the 0.1" copper pads and you're good to go.you can also connect strips together to make them longer. To power this strip, you need 5V power supply.
