AC220V LED controller,support DMX console,2 ports drive max 40960 pixels,support DMX512,WS2811,WS2812,LPD6803,etc,For addressable led strip

Item Type: RGB Controler

Voltage: 220V

Certification: CE,RoHS,CCC

Power Source: AC

Connection Mode: crossover network cable

Features: Master Controller

Remote Distance: none

Controled Method: SD card control

Warranty: 1 year

Max. Load Power: 10W

Applicable Lights: full color lights

Model Number: H802TB

Material: metal

Wattage: 1

drive pixels number: 40960

control slaves number : 64

 1. Features

(1). H802TB is a master controller that works offline, and reads data from SD card to control multiple slave controllers.

(2). Two ports control maximum 64 slave controllers, drive maximum 40960 pixels. 

(3). H802TB can be connected to DMX console and occupies 3 channels, so you can switch files, adjust speed and brightness with DMX console.

(4). Slave controllers are H801RA, H802RA and H801RC. 

(5). Software is “LED Build Software”.

(6). Transmit data based on Ethernet protocol, nominal transmission distance is 100 meters. 

(7). SD card supports FAT32, FAT16 format, maximum capacity is 64G bytes, stores up to 64 DAT files.

 2. Supported Driver Chips

 LPD6803, LPD8806, LPD6812, LPD6813, LPD1882, LPD1889, LPD1883, LPD1886, DMX512, HDMX, APA102, P9813, LD1510, LD1512, LD1530, LD1532, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, WS2812, DZ2809, SM16716, TLS3001, TLS3002, TM1812, TM1809, TM1804, TM1803, TM1914, TM1926, TM1829, TM1906, INK1003, BS0825, BS0815, BS0901, LY6620, DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, 74HC595, 6B595, MBI6023, MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712, ZQL9712HV, etc.

 Note: H802TB can support more than the chips listed above(some chips have the same sequence diagram, for example: UCS512, 

For example: 

if you want to control WS2812B strip, just connect GND, DI on strip to GND, DAT on slave controller.WS2821 and DMX512 have the same protocol, H802TB supports them all).

3. Basic Workflow

 Work with SD card(offline)

 Step1. Connect lights, slave controller and H802TB like the following image.(I didn't draw power supply)

 I use NET1 and NET2, you can also just use NET1.

 

Switch files

Set Playback Mode, press "OK" to save

Set speed, press "OK" to save

Set brightness

For example:

If DMX Address is 1, you can use channel 1,2,3 on DMX Console to switch files, change speed and brightness.

 If DMX Address is 3, you can use channel 3,4,5 on DMX Console to switch files, change speed and brightness.

 In a word, the DMX Address is the starting channel on DMX Console.

 Press "OK" to start addressing.

4. Control DMX512 chip lights

 H802TB can control H801RC, H802RA and H801RA three kinds of slave controllers(they all support DMX512 protocol),

 but by using H802TB + H802RA, you can set DMX address for DMX512 chips.

 

Take TM512 strip for example:

Step1. Set them up

Step2. Set address with four buttons

5. Specifications

 Power Consumption:   1W

 Control Pixels Number:   40960

 Control Slave Controllers Number:   64

 Weight:   1.1KG