Spec Sheet - CONFULL-H803TC

Select Input Voltage:	220V±20% (EU, UK, AU) (Base)
Select Plug Type:	UK (Base), EU (Base), AU (Base)
Availability	In Stock
Condition	Brand New

Model Number: H803TC

Voltage: 220V

Certification: CE,RoHS,CCC

Applicable Lights: lamps with driver chips

Power Source: AC

Controled Method: SD card or computer

Remote Distance: none

Warranty: 1 year

Max. Load Power: 10W

Features: connect computer

Connection Mode: Ethernet Protocol

Material: metal

Wattage: 1

drive pixels number: 170000

control slaves number: 255

Specifications

Input Voltage: Customized

Power Consumption: 1W

Drive Pixels Number: 170000

Weight: 1.1KG

1. Features

(1). H803TC can work with PC(online), SD card(offline) or DMX console.

(2). H803TC drives maximum 170000 pixels, 2 ports control maximum 255 slave controllers.

(3). Slave controllers include H802RA and H801RC.

(4). By combining H803TC with H802RA, you can set address for DMX512 chips.

(5). H803TC transmits signal based on Ethernet Protocol.

(6). Use four buttons or PC to switch files, set play mode, speed and brightness.

(7). SD card supports FAT32, FAT16 format, maximum capacity is 64G bytes, stores up to 64 DAT files.

2. Supported Driver Chips

For example:

if you want to control WS2812B strip, just connect GND, DI on strip to GND, DAT on slave controller.

Step2. Download and Install LED Build Software

In this mode, you will need LED Build Software.

LED Build Software Download: https://drive.google.com/open?id=0B1gzqyV6hfOgUDZBVl84SmRDV28

LED Build Software Tutorial Video: https://drive.google.com/open?id=0B1gzqyV6hfOgUnFjeG9EM3VRZjA

Step3. Program in LED Build Software

Basic software workflow

1. Place Pixels

For example there are 1 slave controller(H801RC) connected to H803TC

2. Light Setting

3. Make Effects

4. Output controller data and put it into SD card

For more details of software operation, please refer to the video post above.

Step4. Configure H803TC with 4 buttons

Power H803TC on

Long press "MENU" button to switch to English

Switch files

Set Playback Mode, press "OK" to save

Set speed, press "OK" to save

Set brightness

Set DMX Address for H803TC

This function is used when H803TC is connected to DMX console

For example:

If DMX Address is 1, you can use channel 1,2,3 on DMX Console to switch files, change speed and brightness.

If DMX Address is 3, you can use channel 3,4,5 on DMX Console to switch files, change speed and brightness.

In a word, the DMX Address is the starting channel on DMX Console.

Press "OK" to start addressing.

Work with PC(online)

Step1. Connect lights, slave controllers and H803TC like the following image.

Step2. Download and Install LED Studio Software

In this mode, you will need LED Studio Software.

LED Studio download link: https://drive.google.com/open?id=0B1gzqyV6hfOgWFpuM3BoN1VaTGs

Step3. NET2 Setting

In online mode, NET2 transmits data received from PC to NET1.

Step4. Allocate an IP address for H803TC

Step5. Program in LED Studio Software

Basic software workflow

1. Place Pixels

For example there are 4 slave controllers(H801RC) connected to H803TC, 8 ports of H801RC are all connected to leds.

In LED Studio

2. Slave Setting

Note: many chips share one option, for example:

3. Multi-Net Setting

4. Make Effects

4. Control DMX512 chip lights

H803TC can control H801RC, H802RA and H801RA three kinds of slave controllers(they all support DMX512 protocol),

but by using H803TC + H802RA, you can set DMX address for DMX512 chips.

Take TM512 strip for example:

Step1. Set them up

Step2. Set address with four buttons

AC 220V RGB LED controller,full color programmable,work online or offline,drive 170000 pixels,controlled by PC or SD card For addressable led strip