


| Select Input Voltage: | 110V±20% (US, CA) - Max 350W (Base), 220V±20% (EU, UK, AU) - Max 700W (Base) |
|---|---|
| Select Plug Type: | US (Base), UK (Base), EU (Base), AU (Base) |
| Availability | In Stock |
| Condition | Brand New |
When calculating the power of your project, please do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system. So 220V we recommend that you Maximum connect 720 watts, 110V we recommend that you Maximum connect 350 watts.

![]()
Controller technical parameters:
1: Operating voltage: AC110-220v
2: Control current: 3A
3: Control distance: 30M
4: Operating temperature: -40°C-60°C
5: 0 to 220V dimming, used for high pressure light bar brightness adjustment. Remote control
Applications
Back/task lighting
Cove LED lighting
Retail LED lighting
Display case LED lighting
Accent LED lights
Under cabinet lighting
led stage lighting
Note
AC110V or 220V power input, the output high voltage AC110V or 220V article lamp directly. Article AC110v or 220 v meet in the same line, at the same time electricity.
The quality assurance for one year. Artificial damage or misuse damage is not within the warranty.
This product uses a dangerous voltage, do not open the shell, touch the conductive body to prevent electric shock.
This product warranty period is one year. Damage to this product due to incorrect operation is not covered by the warranty
Instructions for use:
1. Insert the light bar plug into the controller's output socket. The line sequence should correspond.
2. The power plug is energized, and the remote controller can be used to operate the controller as required.
3. When installing the controller, install the remote control receiver in an obstacle-free position to avoid remote control failure.
4. Don't short out the output