Spec Sheet - BC-802

Select IC Type:	LPD6803 (Base), LPD8806 (Base), TLS3100 (Base), WS2801 (Base), SK6812 (Base), P9813 (Base), SK6812 RGBW (Base), TM1809（WS2811） (Base), TM1814 (Base), TM1814 RGBW (Base)
Availability	In Stock
Condition	Brand New

The DMX512 Signal Decoder adopted the advanced decoding technology to convert the international standard DMX512/1990 signal into standard LPD6803 / LPD8806 / TM1809/P9813/ TLS3001/WS2801/SK6812/TM1814 signals, each decoder has 96/510 DMX output channels, and the output channels can be expanded by adding decoders, therefore, most of the LED lights can be controlled by DMX512/1990 protocol via the signal conversion, then widely used pixel light, digital tube light, floodlight, pixel screen, dancing floor light etc.

Basic Features

1. Input standard DMX512 protocol, Address can be set by the DIP.

2. Automatically adapt input voltage DC5V-24V.

3. Self-Changing Mode exists.

4. Output TTL Signal.

5. Power loss memory function

Standards and Certifications

BC802

DC5V-24V DMX512 Signal Decoder BC-802

1) Decoder address setting

This decoder occupies 3 addresses, adopted Dip switch to set the address, the Dip switches from 1 to 9 are a kind of binary value coding switches used to set DMX512 initial address code, the correlative bits is the 1-9 bits of the DIP switch, the 1st bit is LSC, the 9th bit MSC, 512 addresses totally.

DMX512 initial address code is equal to the total amount of the Dip switches’ number from 1 to 9, press Dip switches downward (ON: at position “1”), user can get the number of its position, if pressing upward (at position “0”), the number of its position is 0. Accept DMX512 signal only when the DIP switch FUN=OFF (at position “0”)

DC5V-24V DMX512 Signal Decoder BC-802 - photo 3

After-Sales

From the day you purchase our products within 3 years, if being used properly in

accordance with the instruction and quality problems occur, we provide free repair or

replacement services except for the following cases:

1.Any defects caused by wrong operations.

2.Any damages caused by an inappropriate power supply or abnormal voltage.

3.Any damages caused by unauthorized removal, maintenance, modifying circuit, incorrect

connections and replacing chips.

4.Any damages due to transportation, breaking, flooded water after the purchase.

5.Any damages caused by earthquake, fire, flood, lightning strike, etc force majeure of

natural disasters.

6.Any damages caused by negligence, inappropriate storing at high temperature

and humidity environment or near harmful chemicals.

7.Product has been updated.

Kindly Reminder

1.Power Source Selection

The power source must be a DC constant voltage type of power supply. Due to the efficient output

in some power supplies are only 80% of the total, so please select at least 20% higher output

power supply than the consumption of LED lights.

Safety warnings

Please don’t install this controller in lightening, intense magnetic, and high-voltage fields.

1.To reduce the risk of component damage and fire caused by a short circuit, make sure

correct connection.

2.Always be sure to mount this unit in an area that will allow proper ventilation to ensure a

fitting temperature.

3.Check if the voltage and power adapter suit the controller.

(please select DC5-24V power supply with constant voltage)

4.Donot connect cables with power on; make sure a correct connection and no short circuit

checked with the instrument before power on.

5.Please don’t open the controller cover and operate if problems occur.

The manual is only suitable for this model; any update is subject to change without