Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-23 | ID: 1969

LED Neon Light Flex Rope accessory T Connector for Single Color/RGB led neon flex 14*26MM

MODEL: LEDNEON-ACCOR-02
Price based on selections below:
$3.98
Apply to:8*16mm Color Changing Neon Lights (Base), 15*25mm Addressable Neon Lights (Base)
Select Applied to:DC12/24V/110/220V - 4-PIN Neon Lights (Base), DC12/24V/110/220V - 2-PIN Neon Lights (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create flawless, professional three-way junctions in your lighting projects with the T-Connector for 14x26mm LED Neon Flex. This essential accessory is engineered to split a single run of neon rope light into two perpendicular branches, enabling complex designs, grid patterns, and intricate lettering for signage. Unlike simple L-connectors, this T-splitter allows you to seamlessly branch power and signal in multiple directions from a single point. It's built for versatility, with options available for both 2-pin single color and 4-pin RGB neon flex. Crucially, it supports the full range of voltages from low-voltage DC12V/24V to high-voltage AC110V/220V systems, making it a universal solution for your 14x26mm neon installations.

Key Features

Seamless T-Junctions

Splits one neon flex run into two perpendicular directions for clean, professional three-way connections.

Profile Specific Design

Precision-molded for a secure, snug fit with 14x26mm LED neon flex rope lights.

Broad Compatibility

Available in 2-pin models for single-color neon and 4-pin models for RGB color-changing neon.

Universal Voltage Support

Functions perfectly across all common LED neon systems, including DC12V, DC24V, AC110V, and AC220V.

Durable Construction

Made from high-quality insulating plastic to ensure a reliable, safe, and long-lasting electrical connection.

Technical Highlights

  • Enables complex layouts and grid designs not possible with straight or L-connectors.
  • Internal copper pins provide excellent conductivity for consistent brightness and color.
  • Simplifies wiring by eliminating the need to solder or splice cables for branching runs.

Product Specifications

ParameterDetails
ModelLEDNEON-ACCOR-02
Product TypeT-Shape Connector
Primary Compatible Profile14mm x 26mm LED Neon Flex
Other Compatible Profiles15x25mm, 8x16mm (Selectable options)
Pin Configuration2-Pin (for Single Color), 4-Pin (for RGB)
Supported VoltageDC12V, DC24V, AC110V, AC220V
MaterialInsulating PVC Plastic
ColorWhite / Translucent

Application Scenarios

Commercial Signage & Lettering Indispensable for creating illuminated signs and channel letters. Use the T-connector to form letters like 'E', 'F', 'H', and 'T' by branching a central line, ensuring uniform lighting and clean connections.
Architectural & Cove Lighting Perfect for creating grid patterns on ceilings or walls, or for outlining architectural features like windows and doorways where light paths need to intersect. This connector simplifies complex architectural lighting layouts.
Retail & Exhibit Displays Build eye-catching, multi-directional lighting designs for retail shelving, product displays, and trade show booths. The T-connector allows for creative and intricate layouts to draw customer attention.

How to Install the LED Neon T-Connector

  1. IMPORTANT: Disconnect the power supply before beginning installation.
  2. Cut your LED neon flex sections cleanly at the designated cutting marks.
  3. Align the pins of the connector with the copper wire contacts inside the neon flex.
  4. Firmly push the ends of the neon flex sections into all three ports of the T-connector. Ensure the pins pierce the wires for a solid connection.
  5. Briefly reconnect power to test the connection. If all sections illuminate correctly, disconnect power again.
  6. For outdoor or damp locations, apply a generous amount of silicone sealant around all connection points where the neon meets the connector to create a waterproof seal.
⚠ Precautions
  • Always choose the correct pin-count for your neon flex: 2-pin for single color, 4-pin for RGB.
  • This connector is specifically designed for 14x26mm neon flex. Using it with other sizes may result in a poor or unsafe connection.
  • Ensure the polarity (+/-) is correctly aligned for DC low-voltage systems.
  • Failure to properly seal the connection with silicone glue in wet environments will void any water resistance.

What's in the Box

  • ✓1 x T-Connector for LED Neon Flex (in selected pin configuration)

Frequently Asked Questions

Q: What is this T-connector used for?

A:It is used to split one run of LED neon flex into two separate runs at a 90-degree angle, creating a clean three-way intersection for complex designs.

Q: Is this connector waterproof for outdoor use?

A:The connector itself is weather-resistant plastic. To make the connection fully waterproof, you must apply silicone sealant around all joints where the neon rope enters the connector.

Q: Will this fit my 8x16mm neon light?

A:This model is primarily for the 14x26mm neon profile. However, we offer selectable options for other sizes including 8x16mm and 15x25mm on the product page.

Q: How do I choose between the 2-pin and 4-pin versions?

A:Select the 2-pin connector for single-color LED neon flex. Select the 4-pin connector for multi-color RGB LED neon flex.

Q: Can I use this for both 12V and 110V neon lights?

A:Yes, this is a passive connector with no internal electronics, so it works perfectly with the full range of compatible neon flex voltages, from DC12V up to AC220V.

Q: Does the connector include the metal pins?

A:Yes, the connector comes with the sharp metal pins pre-installed, ready to pierce the neon flex wiring for a secure connection.

© 2026 SuperLightingLED. All specifications are subject to change without notice.