Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 1996

Dream Color LED Light Strips Kit 16.4 Ft SMD 5050 Addressable Pixel UCS1903 RGB Waterproof IP67 Flexible Light Strip with Remote Control and DC12V Power Supply for DIY Lighting and Outdoor Lighting

MODEL: B075M6DNN7
Price based on selections below:
$40.98
Select LED Quantity:150 LEDs/Roll (Base), 300 LEDs/Roll
Select Length:16.4ft (5 meters) (Base)
Select Operating Voltage:12VDC (Base)
Select Plug Type:US (Base), UK (Base), EU (Base), AU (Base)
Select Waterproof Rating:Non-Waterproof IP20 - Adhesive Back (Base), Surface Glued IP65 - Adhesive Back, Outdoor Silicone Tube IP67 - With Brackets
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

 

Features:

Full set, you can light it easily and no need buy any accessories.
Light up colorful home life, DIY household lights for hallways/stairs/trails /windows/kitchen/car.
Long life span 50,000+ hours.
Low power consumption, energy saving,
and environmental protection.
Cuttable every 3 LEDs along the cutting marks, according to requirement.
Completely smooth and even light spread, solving the uneven luminous problem.


Datasheet of Strip:
Input voltage: DC 12V
LED type: UCS1903 (V+, DAT, GND)
Power: 7.2W/m (
150LEDs/Reel) or 12W/m (300LEDs/Reel)
Strip Length: 16.4ft(5 meters)
Strip IP Class: Waterproof IP20 / IP65 / IP67

Remote Controller:
Input voltage: 5-24V DC
Max output current: 12A
Maximum output power: 60W-288W(5V-24V)
Control mode: RF
Output: 5-24V DC
Control distance: up to 15m

Adaptor:
Output: 12V
Input: 100-240VAC, 50/60Hz
Power Consumption: 60W / 72W

Package Includes:
1 X 16.4 Ft sticky LED Strip Light (IP20 / IP65)
1 X SPI Signal Receiver
1 X 21 Keys RF Controller
1 X DC12V Power Supply

1 X 16.4 Ft LED Strip Light (IP67)
1 X SPI Signal Receiver
1 X 21 Keys RF Controller
1 X DC12V Power Supply
10 x Mounting Brackets


Tips:
The driver only can load 16.4ft(5m) length LED strip, please don't overload or it will 
break the driver.
Please make sure the two wires(black and red) at the end of strip don’t touch each other before lighting the strip.
There are two connecting ways, one is Driver-Controller-Strip, another one is Driver-Strip. If connected by Driver-Controller-Strip did not work, maybe the controller is not connected well. Please try Driver connecting Strip directly. 
Note, the power cord 
connects to the driver must insert deeply enough, when power on the driver, the blue signal on the driver will light.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.