1CH*5A DMX512 AC Switch DP

RDM/Stand-alone function/Numeric display

Features

● DMX512 decoder o control power on/off to cater for the unwanted dimming lighting system.

● One channel output, AC input and AC output, only one DMX512 address.

● Comply with the DMX512 standard protocols.

● Digital numeric display set DMX to decode start address by buttons.

● RDM function can realize intercommunication between DMX master and decoder.

 For example, DMX decoder address can be set by DMX master console.

● Stand-alone manual on/off mode selectable, which be controlled by buttons, instead of DMX signal.

Input and Output

Input voltage: AC100-240V

Output voltage: AC100-240V

Output current: Max 5A

Output power: 500-1200W

 DP     

Note:

1. A DMX signal amplifier is needed if more than 32 decoders are connected, or use overlong signal line,

 signal amplification should not be more than 5 times continuously.

2. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W

 The 90-120Ω terminal resistor at the end of each DMX signal line.

3. If output connects with a capacitive or inductive load, the maximum output current only up to 5A.

 If output connects with resistive load, the maximum output current may up to 15A.