Spec Sheet - RGBW-ACCESSORIE-006

Select Width:	10mm (Base), 12mm (Base)
Availability	In Stock
Condition	Brand New

Create complex, multi-directional lighting layouts with ease using the T-Shape 5-Pin Solderless Connector. Specifically designed for RGBW LED strips, this connector allows you to split a single run into two perpendicular branches, forming a perfect 'T' junction. It's the ideal solution for building grid patterns, navigating around obstacles, or routing light in three directions from one point—all without touching a soldering iron. Available in both 10mm and 12mm widths, it provides a secure and reliable connection for popular 5050 and 3528 RGBW LED strips. This simple accessory unlocks advanced design possibilities for your cove lighting, display cases, and creative DIY projects, ensuring a clean and professional finish.

Key Features

T-Shape 3-Way Split

Splits a single LED strip run into two separate, perpendicular directions for complex layouts.

Solderless Snap Connection

Features easy-to-use snap-down clasps that create a secure connection in seconds, no tools required.

Dual Width Compatibility

Available in both 10mm and 12mm versions to perfectly match the width of your 5-pin RGBW LED strips.

Reliable Power Distribution

Maintains consistent voltage and signal integrity across all connected strip segments for uniform color and brightness.

Clean & Compact Design

Low-profile form factor is easy to hide, ensuring a professional and seamless lighting installation.

Technical Highlights

Enables grid patterns and multi-directional lighting layouts from a single power source.
Robust snap-down mechanism ensures a reliable physical and electrical connection that resists vibration.
Precision-engineered for 5-pin RGBW strips, guaranteeing correct channel alignment for R, G, B, W, and V+.
Constructed from fire-retardant PC material for enhanced safety and durability.

Product Specifications

Parameter	Details
Model	RGBW-ACCESSORIE-006
Product Type	T-Shape Solderless Connector
Pin Count	5 Pins
Compatible Strip Width	10mm or 12mm (select option)
Compatible Strip Type	5-Pin RGBW / RGBWW (SMD 5050, 3528, etc.)
Connection Method	Solderless, Clip-on
Housing Material	Fireproof PC
Pin Material	Pure Copper
Working Voltage	DC 5V-24V
Max Supported Current	5A

Application Scenarios

Grid and Matrix Lighting Perfect for creating illuminated grid patterns on ceilings or walls for a modern, architectural lighting effect. Use these T-connectors at each intersection to build out large, uniform matrices of light.

Complex Cove & Under-Cabinet Lighting Run a primary strip along a cabinet base and use the T-connector to branch off and illuminate perpendicular sections. This is also ideal for complex ceiling coves that have multiple intersecting paths.

Retail and Exhibit Displays Effectively light up multi-sided retail displays or shelving units. A T-connector allows you to route lighting around a central column or split a run to illuminate both the front and side of a product display from one continuous circuit.

How to Use This T-Shape Connector

Ensure the power supply to your LED strip is turned off and unplugged.
If needed, cut your 5-pin RGBW LED strip on the designated copper cut line.
Open the white clasps on all three sides of the T-connector by gently prying them upwards.
Slide one end of each LED strip segment into a connector port. Make sure the copper pads on the strip slide underneath the connector's metal pins.
Crucially, align the '+' polarity marking on the LED strip with the '+' marking on the connector for all three strips.
Firmly press down on each white clasp until it snaps shut, securing the strips in place.
Gently tug on each strip to confirm a secure connection. Reconnect power to test your new layout.

⚠ Precautions

This connector is exclusively for 5-pin RGBW/RGBWW LED strips. It is not compatible with 2-pin single color, 3-pin tunable white, or 4-pin RGB strips.
Please select the correct connector width (10mm or 12mm) that matches your LED strip's PCB width.
This product is intended for indoor, dry locations with non-waterproof LED strips. If using with waterproof strips, the silicone/epoxy coating must be carefully removed from the contact points before installation.

What's in the Box

✓1 x T-Shape 5-Pin Solderless Connector for RGBW LED Strips

Frequently Asked Questions

Q: What is the difference between this T-shape and an L-shape connector?

A:An L-shape connector creates a single 90-degree turn for corners. This T-shape connector creates a three-way junction, allowing you to split one strip run into two different perpendicular directions.

Q: Do I need to solder anything?

A:No, this is a completely solderless connector. It uses secure snap-down clasps to make the electrical connection, making installation fast and easy.

Q: How do I choose between the 10mm and 12mm versions?

A:You must measure the width of your LED strip's flexible PCB (the board itself, not including any waterproof coating). Choose the connector size that exactly matches your strip's width for a proper and secure fit.

Q: Will this work with my 4-pin RGB LED strips?

A:No, this is a 5-pin connector designed specifically for RGBW or RGBWW strips that have five copper pads. For standard 4-pin RGB strips, you will need a 4-pin connector.

Q: Is this connector waterproof?

A:No, this connector is designed for indoor use with non-waterproof (IP20/IP33) LED strips. It is not suitable for outdoor or wet environments.

Q: Can I use this to join strips of different widths, like 10mm to 12mm?

A:No, you must use the 10mm connector for 10mm strips and the 12mm connector for 12mm strips. The pin spacing and housing are different and they are not cross-compatible.

T Shape RGBW LED Strip Light 5 Pin Connector for 10/12 mm Wide 5050 and 3528 LED Indoor String Lights Extending Connection