Spec Sheet - RGB/CCT-ACCESSORIE-9

Availability	In Stock
Condition	Brand New

Eliminate the hassle of soldering with the 12mm 6-Pin Strip-to-Controller Solderless LED Connector. This essential accessory is expertly designed to create a secure bridge between the end of your 12mm wide RGB+CCT LED strips and your controller. Featuring a convenient, pre-attached 13cm (5.1-inch) color-coded cable, this solderless led strip connector allows for a quick and effortless installation. Simply open the clasp, insert your strip, and connect the wires to your RGB+CCT controller's terminals. It's the ideal solution for DIY enthusiasts and professionals seeking a reliable, tool-free method to power and control their advanced multi-color lighting setups, ensuring a clean and stable connection every time.

Key Features

Completely Solderless Connection

Features a robust clamp-down mechanism that pierces the strip's contacts, creating a secure electrical link without any soldering.

Strip-to-Controller Design

Specifically engineered to connect the start of an LED strip run directly to a controller's input terminals.

Pre-Wired for Convenience

Includes an integrated 13cm (5.1") 6-conductor cable, saving you time and effort in preparing wires for your controller.

Precise Compatibility

Designed exclusively for 6-pin, 12mm wide RGB+CCT (RGB + Tunable White) flexible LED strips.

Reliable & Reusable

The strong clasp ensures a firm grip on the strip for a stable connection, and can be opened and reused if needed.

Technical Highlights

Ensures proper alignment and contact for all six channels of RGBCCT lighting.
Color-coded wires match standard RGBCCT controller inputs for intuitive wiring.
Compact connector body minimizes visual intrusion in your lighting installation.

Product Specifications

Parameter	Details
Product Name	12mm 6 pin Strip To Controller Solderless Easy LED Connector with 13cm Cable
Model	RGB/CCT-ACCESSORIE-9
Connector Type	Strip to Controller Pigtail
Connection Method	Solderless, Clamp-down
Strip Compatibility	RGB+CCT LED Strips
Supported PCB Width	12mm
Number of Pins	6
Attached Cable Length	13 cm / ~5.1 inches
Material	Plastic, Copper
IP Rating	IP20 (Indoor use only)

Application Scenarios

DIY Smart Home Lighting Perfect for hobbyists and homeowners setting up custom under-cabinet, cove, or accent lighting. This solderless led connector simplifies the most common connection point—the controller—making your smart lighting project faster and more accessible.

Custom Light Fixture Assembly When building custom linear fixtures or integrating LED lighting into furniture, this connector provides a clean, professional starting point. The pigtail allows for easy routing and connection to a concealed RGB+CCT controller.

Quick Installations & Repairs Ideal for installers on a deadline or for quick repairs. If a strip's original soldered connection to a controller fails, this connector offers a fast, solder-free replacement to get the lights working again.

How to Use This Solderless Connector

Step 1: Turn off all power to your lighting system before installation.
Step 2: Open the white hinged clasp on the top of the connector.
Step 3: Carefully slide your 12mm RGB+CCT LED strip into the connector, ensuring the six copper pads on the strip align directly under the six metal pins inside the connector.
Step 4: Press the clasp down firmly until you hear it click shut. This action pierces the strip's contacts to create a secure connection.
Step 5: Connect the six color-coded wires from the 13cm cable to the corresponding screw terminals on your RGB+CCT controller (e.g., R, G, B, WW, CW, V+).
Step 6: Restore power to your system and test all colors and functions to confirm a successful connection.

⚠ Precautions

This connector is designed ONLY for 12mm wide, 6-pin RGB+CCT LED strips. It will not work with other widths or pin configurations.
Ensure the polarity and wire order match between the strip, the connector, and your controller. Incorrect wiring can prevent the strip from lighting up correctly.
This is a non-waterproof (IP20) connector. It must be used in dry, indoor locations only.
Do not pull on the cable forcefully, as this may damage the connection points inside the housing.

What's in the Box

✓1 x 12mm 6-pin Strip-to-Controller Solderless Connector with 13cm Cable

Frequently Asked Questions

Q: Do I need to solder anything to use this connector?

A:No, this is a completely solderless connector. It uses a clamp mechanism to create a secure connection to the LED strip.

Q: Will this work for my 10mm 4-pin RGB strip?

A:No, this connector is specifically designed for 12mm wide, 6-pin RGB+CCT LED strips and is not compatible with other sizes or pin counts.

Q: What is the 13cm cable for?

A:The pre-attached 13cm cable serves as a pigtail, allowing you to easily connect the wires directly into the screw terminals of an RGB+CCT controller without needing to solder wires onto the connector yourself.

Q: Can I use this to connect two LED strips together?

A:This model is intended to connect a single LED strip to a controller. For connecting two strips end-to-end, you would need a strip-to-strip connector.

Q: Are the wires on the cable color-coded?

A:Yes, the six wires are color-coded to simplify the process of matching them to the correct terminals on your controller.

Q: Is this connector waterproof for outdoor use?

A:No, this is an IP20-rated connector and is not waterproof. It should only be used in dry, indoor environments.

12mm 6 pin Strip To Controller Solderless Easy LED Connector with 13cm Cable for RGB+CCT LED Strip