Spec Sheet - D24A

Availability	In Stock
Condition	Brand New

Features

● 24 channels constant voltage output, Max. 5A current per channel, up to 2880W output power.

● Master & decoder mode, RDM function.

● Easy operation with OLED display and 4 buttons.

● DIM/CCT/RGB decoding mode selectable.

● PWM frequency 250/500/2000/8000Hz selectable.

● 16bit (65536 levels) /8bit (256 levels) grey level selectable.

● Output dimming curve gamma value 0.1-9.9 selectable.

● Stand-alone RGB mode and 24 channel dimmer mode selectable, work as DMX master(8 bit) to control other decoders.

● Built-in 10 RGB programs, speed and brightness adjustable.

● Comply with the DMX512 standard protocols.

● DMX signal optoelectronic isolation / amplify.

● Over-heat / Over-load / Short circuit protection, recover automatically.

● With fast self-testing function.

Standards and Certifications

Specifications Download

Note:

1. Connecting with a green terminal(DMX AMP) or an extra amplifier will be needed when more than 32 decoders are connected or use an overlong signal line, signal amplification should not be more than 5 times continuously.

2. If the recoil effect occurs because of a longer signal line or bad line quality, please try to connect 0.25W to The 90-120Ω terminal resistor at the end of each DMX signal line.

OLED 12-24VDC Constant voltage IP20 CV DMX Decoder D24A