Spec Sheet - LN-CON-RF8B(T)-3CH-LV

Select Output Voltage:	DC12V (Base), DC24V (Base)
Availability	In Stock
Condition	Brand New

The wireless 8-key controller uses an advanced computer control chip to control various lamps with LED as the light source, such as point light source, soft light strip, wall washer, glass curtain wall lamp, etc.; with power-off storage, indicator light synchronization display At the same time, it has the advantages of low price, convenient wiring, and simple use; according to the actual needs of customers, it can achieve light changes such as jump, gradual change, strobe and so on.

Standards and Certifications

Technical Parameters

● Working Temperature: -20-60℃

● Supply Voltage: DC12V, 24V optional (specify the required voltage when ordering)

● Output: 3 Channel

● Connection Method: Common

● Dimensions: 121mmX53mmX25mm

● Packing Size: 150mmX76mmX51mm

● Net Weight: 255g

● Gross Weight: 350g

● Static Power Consumption: <1W

● Output Current: <4A (each circuit)

● Output Power: 12V:<144W, 24V:<288W

Dimensions

LN-CON-RF8B(T)-3CH-LV RGB led controller size

Interface description

Power input interface: using screw terminals

LN-CON-RF8B(T)-3CH-LV RGB led controller input

Power input interface: using screw terminals

LN-CON-RF8B(T)-3CH-LV RGB led controller output

Instructions for use

1. Connect the load line first, and then connect the power line; make sure there is no short circuit between the connection lines before powering on;

2. It adopts membrane keys and wireless radio frequency control. The remote control has the same function as the panel, with a total of 8 keys.

LN-CON-RF8B(T)-3CH-LV RGB led controller bottom (1): In any state, the controller output can be turned on or off;

LN-CON-RF8B(T)-3CH-LV RGB led controller bottom (2): play/pause button, you can play or pause the change of led, easy to observe the static effect of led;

S+(3): Each time the change speed series is incremented by 1;

S-(4): Each time the change speed series is decreased by 1;

B+(5): Brightness control of output signal, plus 1 for each brightness level;

B-(6): Decrease the brightness level by 1 each time you press it;

M+(7): Add 1 every time you change the style;

M-(8): Each time the pattern is changed, the value decreases by 1.

The standard change function is shown in the following table:

Serial Number	Sample Color	Remarks
1	Static red	adjustable brightness,speed is not adjustable
2	Static green
3	Static blue
4	Static yellow
5	Static purple
6	Static cyan
7	Static white
8	Three-color jump	adjustable brightness,adjustable speed
9	Seven-color jump 22 Green-red alternating gradient	adjustable brightness,adjustable speed
10	Three-color gradient	The brightness is not adjustable,adjustable speed
11	seven-color gradient	The brightness is not adjustable,adjustable speed
12	Three-color running water	Brightness adjustable,adjustable speed 25 Automatic
13	Red strobe	Brightness adjustable,adjustable speed 25 Automatic
14	green strobe	Adjustable brightness,Adjustable speed
15	Blue strobe
16	Yellow strobe
17	Purple strobe
18	Cyan strobe
19	White strobe
20	Red and blue alternating gradient	The brightness is not adjustable,Adjustable speed
21	Alternating blue and green
22	Green-red alternating gradient
23	The whole fades in and out
24	random flash	speed adjustable, brightness adjustable
25		Automatic 1 to 24

Typical applications

LN-CON-RF8B(T)-3CH-LV RGB led controller wiring diagram

Package including

1 x RGB LED Remote Controller

1 x RF Touch Remote Control

KL-CON-RF8B(T)-3CH-LV 3 Channel Wireless 8-key Controller, LED Wireless RGB Controller