| Availability | In Stock |
|---|---|
| Condition | Brand New |
The human body induction switch is an infrared detection controller that uses infrared detection to control the load switch. The user can install the human body sensor in an appropriate environment according to actual needs.
Technical Parameters
Working Temperature: -20-60℃
Power Supply Voltage: DC12-24V
Output Voltage: DC12-24V
Output: 1Channel
Sensing Distance: 5-8 M
Induction Angle:60°
Output Current: <6A
Output Power: 12V:<72W, 24V:<144 W
Delay Time: 1-10 min (adjustable)
Dimensions: L76ΧW45ΧH34 mm
Packing Size: L87ΧW54ΧH38mm
Net Weight: 32g
Gross Weight: 60g
Dimensions
Interface Description
Power input/load output interface
Instructions for use
1. Connect the load line first, and then the power line; make sure there is no short circuit between the connection lines before powering on;
2. There is a time setting knob on the back of the controller. Rotate the knob to set the minutes of the switch off delay. When a person is detected, the load light is turned on. When the person leaves for the set number of minutes, the load The light goes out automatically.
3. The signal output line and input line of the controller should be connected correctly.
Typical application
