| Availability | In Stock |
|---|---|
| Condition | Brand New |
The load converter is a new controller newly developed by our company. This product is easy to install and can convert the controller of the low-voltage load into a high-voltage load. The upper-level controller (low-voltage controller) and the converter are isolated. The controller is a 3-way output, which can be controlled by a low-voltage controller to achieve the effect of the same high-voltage load and low-voltage load mode and synchronized control.
Technical Parameters
Working Temperature: -20-60℃
Power Supply Voltage: AC220V
Output: 3 Channels
Connection method: Common (DC220V)
Dimensions: L164 * W40 * H30 mm
Packing Size: L170*W45*H45 mm
Net Weight: 120g
Gross Weight: 168g
Static Power Consumption: <1W
Output Current: <2A (each circuit)
Input Signal: PWM signal, amplitude 5-24V
Dimensions
Interface description
1. 5/6 feet power input: city power 220V, 50hz;
2. Pin 1/2/3/4 signal input: Pin 1/2/3 is a signal-, connected to the led-(R/G/B) output from the previous controller, and pin 4 is a signal +, connected to a V+ output by the level controller;
3. Pin 7/8/9/10 Load output: Pin 7 is the positive stage of the controller output (shared), and the negative pole of the 8/9/10-bit three-way output;
Typical application
Installation method
Connect the corresponding wires according to the interface instructions, taking care not to reverse the wires.
Precautions
Connect the load cable first, and then the power cable; make sure there is no short circuit between the input and output cables before powering on.v