V1-KF 4CH*4A DC12-24V Constant Voltage 4 Knob Dimming LED RF Controller，Will Replace By V4-K

V1-KF has been discontinued, please check the 4CH V4-K for a replacement. 

 

Features V1-KF

● 4 channel dimming constant voltage LED RF controller, can also be used as a 4 zone dimming RF remote.

● 4 knob dimming, digital numeric display and easy key operation.

● Match with RF 2.4G 4 channel dimming remote control optional.

● 256 levels 0-100% dimming smoothly without any flash.

● PWM frequency 250/500/2000/8000Hz selectable.

● Logarithmic or linear dimming curve selectable.

 

4 Knob Controller Work as 4 zone dimming RF remote

This 4 knob controller work as RF remote can match with multiple single color dimming LED RF controller.

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key of receiver,

immediately rotate the knob.

The LED indicator fast flash a few times

means match is successful.

Delete:

Press and hold match key of the receiver for 5s

to delete all match,

The LED indicator fast flash a few times

means all matched RF remotes were deleted.

Use Power Restart

Match:

Switch off the power of the receiver, then switch on power again,

immediately rotate knob 3 times.

The light blinks 3 times means match is successful.

Delete:

Switch off the power of the receiver, then switch on power again,

immediately rotate knob 5 times.

The light blinks 5 times means all matched remotes were deleted.