| Availability | In Stock |
|---|---|
| Condition | Brand New |
PS-75-24 has been discontinued now, please check the PB-75-24 for replacement.
Features
● Dimming interface: RF Wireless, AC Push-Dim
● Match with Skydance’s 2.4G single color remote control, one RF LED driver accepts up to 10 remote controls
● Universal AC input / Full range
● 1 channel constant voltage output, Max. total output power 75W
● Auto-transmitting function: LED driver automatically transmit a signal to another LED driver with 30m control distance
● Synchronize on multiple numbers of LED drivers
● Over-heat / Over-load / Short circuit protection, recover automatically
● Suitable for indoor LED lighting application
● 5 Year, 50,000hr warranty
Application
● Suitable for LED related fixture or appliance which use LED light bar and LED tape (like LED Decoration or Advertisement devices).
● Office / Commercial / Domestic Lighting, Hotels, Retail and Display.
● Use for retrofit upgrades & new luminaire designs.
Match Remote Control (two-match ways)
End-user can choose a suitable match/delete ways. Two options are offered for selection:
Use Match key
Match:
Short press match key, immediately press on/off
key (single-zone remote) or zone key (multiple zones
remote) of the remote.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again,
an immediately short press on/off key (single-zone remote)
or zone key (multiple zones remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power, then switch on power again,
an immediately short press on/off key (single-zone remote)
or zone key (multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Technical Parameters
Input and Output
Input Voltage: AC 100V~240V
Leakage Current:<5mA
Output Voltage: DC24V
Output Current:Max.3.125A
Output Power: Max. 75W
Output Type: Constant voltage
Dimming Range:0~100%
PWM Frequency: 500Hz
Holds Time: 8ms/AC100V, 8ms/AC240V
Environment
Working Temperature:-30℃~50℃
Storage Temperature:-40℃~80℃, 10%~95%RH
Temperature Coefficient: ±0.03%/℃ (0-50%)
Waterproof Rating: IP20
PS-75-24 
Standards and Certifications
RF Connection
When using multiple RF drivers, two application method:
1. All the drivers in the same zone.
Auto-transmitting: One driver can transmit the signals from the remote to another driver within 30m,
as long as there is a driver within 30m, the remote control distance can be limitless.
Auto-synchronization: Multiple drivers within 30m distance can work synchronously when they are controlled
by the same remote.
Driver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that driver placements should be no further apart than15m.
2. Each driver(one or more) in a different zone, like zone 1, 2, 3 or 4.
0/1-10V Connection
● The 0/1-10V input is operable via commercially available simple rotary wall switches designed for 0/1-10V
dimming equipment or from dedicated system central dimming controllers.
● Compliant with 0-10V, 1-10V, 10V PWM, RX(4 in 1).
● We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces,
The maximum length of the wires from dimmer to the LED driver should be no more than 15 meters.
● If the LED driver is used with the RF remote or Push-Dim interface prior to using the 0/1-10V interface,
the 0/1-10 V signal should change over 10% to return 0/1-10 V control.
AC Push-Dim connection
The provided AC Push-Dim interface allows for a simple dimming method using commercially available non-latching
(momentary) wall switch.
● Short press: Turn on or off the light.
● Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes in the opposite direction.
● Dimming memory:
Light returns to the previous dimming level when switched off and on again, even at power failure.
● Synchronization:
If more than one LED driver are connected to the same push switch, do a long press for more than 10s,
then the system is synchronized and all lights in the group dim up to 100%.
This means there is no need for any additional synchrony wire in larger installations.
We recommend the number of LED drivers connected to a push switch does not exceed 25 pieces,
The maximum length of the wires from push to the LED driver should be no more than 20 meters.
