| Availability | In Stock |
|---|---|
| Condition | Brand New |
Features
● Apply to dual color LED controller to control CCT color temperature led strip lights.
● Each remote can match one or more receiver.
● CR2032 battery powered.
● Operate with LED indicator light.
Match Remote Control (two-match ways)
End-user can choose a suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key,
immediately press on/off key on the remote.
The LED indicator fast flash a few times
means the match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again,
an immediately short press on/off key 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Switch off the power, then switch on power again,
an immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Safety Information
1. Read all instructions carefully before you begin this installation.
2. When installing the battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Technical Parameters
Input and Output
Working Voltage: DC3V
Working Current:<5mA
Standby Current: <2μA
Remote Distance:30m(Barrier-free space)
Warranty and Protection
Warranty: 5 years
Environment
Operation Temperature:-30℃~+55℃
Case Temperature(MAX.):+85℃
Waterproof Rating: IP20
Safety and EMC
EMC Standard (EMC): EN301 489,EN 62479
Safety Standard(LVD): EN60950
Radio Equipment(RED): EN300 328
Certification: CE,EMC,LVD,RED
