| Availability | In Stock |
|---|---|
| Condition | Brand New |
Features
● Apply to single color, dual color or RGB LED controller.
● Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.
● Each remote can match one or more receiver.
● CR2032 battery powered.
● Desk mount, removeable anywhere easily.
Safety Information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately push the knob.
The LED indicator fast flash a few times
means match is successful.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power again,
immediately push the knob 3 times.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power again,
immediately push the knob 5 times.
The light blinks 5 times means all matched remotes were deleted.
Technical Parameters
Input and Output
Output Signal:RF 2.4GHz
Working Voltage: DC3V(CR2032)
Working Current:<5mA
Standby Current: <10μA
Remote Distance:30m(Barrier-free space)
Warranty and Protection
Warranty: 5 years
Environment
Operation Temperature:-30℃~+55℃
Case Temperature(MAX.):+85℃
Waterproof Rating: IP20
Safety and EMC
EMC Standard (EMC): EN301 489,EN 62479
Safety Standard(LVD): EN60950
Radio Equipment(RED): EN300 328
Certification: CE,EMC,LVD,RED
Specifications Download 
Standards and Certifications
Dimension
