PK2(G) DC3V Rotary Glass Panel RF Color Temperature Remote Controller

Features

● Apply to single color, dual color or RGB LED controller.

● Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.

● Each remote can match one or more receiver.

● CR2032 battery powered.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately push the knob. The LED indicator fast flash a few times means match is successful.

Delete:

Press and hold match key for 5s to delete all match,The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:

Switch off the power, then switch on power again, immediately push the knob 3 times.The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again, immediately push the knob 5 times.The light blinks 5 times means all matched remotes were deleted.

Knob Function

PK2(G) Color temperature remote

● Push: Turn on or off light.

After turn on light:

● Rotate: Rotate knob to change color temperature or brightness (2.5 turns, 50 levels).

● Push twice: Switch between color temperature or brightness adjustment.

● Long push(1-6s): Continuous 256 levels brightness adjustment.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.

A long time without the remote control, remove the battery.

When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.