| Select Input Voltage: | DC12-48V (Base) |
|---|---|
| Upgrade version | V4-K (Base) |
| Availability | In Stock |
| Condition | Brand New |
This V3-K RGB controller has been upgraded to new version 4CH V4-K, please click to check.
Features V3-K
● RGB constant voltage LED RF controller, can also be used as a RGB RF remote.
● 4 knob dimming, digital numeric display and easy key operation.
● Match with RF 2.4G single zone or multiple zone RGB remote control optional.
● 256 levels 0-100% dimming smoothly without any flash.
● Built in 10 dynamic mode, include jump or gradual change style.
● PWM frequency 250/500/2000/8000Hz selectable.
● Logarithmic or linear dimming curve selectable.
4 Knob Controller Work as RGB RF remote
This 4 knob controller work as RGB RF remote can match with one or multiple RGB LED RF controller.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key of receiver, immediately press on/off key on the knob controller. The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key of the receiver for 5sto delete all match, The LED indicator fast flash a few times means all matched RF remotes were deleted.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 3 times on the knob controller. The light blinks 3 times means match is successful.
Delete:
Switch off the power of the receiver, then switch on power again, immediately short press on/off key 5 times on the knob controller. The light blinks 5 times means all matched remotes were deleted.
