Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 3447

RK3 DC3V Desk Mount RGB Remote Control(CR2032 Battery) ,RGB LED controller

MODEL: RK3
Price based on selections below:
$26.98
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Features

● Apply to SkyDance RF Series RGB LED controllers only. (Since the control panel does not feature a separate white light display, it is not compatible with RGBW and RGBCCT controllers and lights. We have V4-K knob controller for RGBW, or you can check our new M604S knob RGBW controller.)

● Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.

● Each remote can match one or more RF receiver.

● CR2032 battery powered.

● Desk mount, removeable anywhere easily.

 

Safety Information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.

A long time without the remote control, remove the battery.

When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

 

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately push the knob.The LED indicator fast flash a few times means match is successful.

Delete:

Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:

Switch off the power, then switch on power again, immediately push the knob 3 times. The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again, immediately push the knob 5 times. The light blinks 5 times means all matched remotes were deleted.

 

Technical Parameters

Input and Output

Output Signal:RF 2.4GHz

Working Voltage: DC3V(CR2032)

Working Current:<5mA

Standby Current: <10μA

Remote Distance:30m(Barrier-free space)

Warranty and Protection

Warranty: 5 years

Environment

Operation Temperature:-30℃~+55℃

Case Temperature(MAX.):+85℃

Waterproof Rating: IP20

Safety and EMC

EMC Standard (EMC): EN301 489,EN 62479

Safety Standard(LVD): EN60950

Radio Equipment(RED): EN300 328

Certification: CE,EMC,LVD,RED

 

Specifications Download   PDF 

 

Dimension

RK1

RK1

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.