PF3(G) DC3V Glass Panel RGB Remote Controller(CR2032 Battery)

Features

● Apply to single color, dual color or RGB/RGBW LED controller.

● Each remote can match one or more receiver.

● CR2032 battery powered.

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:

Short press match key, immediately press on/off

key on the remote.

The LED indicator fast flash a few times

means match is successful.

Delete:

Press and hold match key for 5s to delete all match,

The LED indicator fast flash a few times

means all matched remotes were deleted.

Use Power Restart

Match:

Switch off the power, then switch on power again,

immediately short press on/off key 3 times on the remote.

The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again,

immediately short press on/off key 5 times on the remote.

The light blinks 5 times means all matched remotes were

deleted.

 

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.

A long time without the remote control, remove the battery.

When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

 

Technical Parameters

Input and Output

Output Signal: RF 2.4GHz

Working Voltage: DC3V(CR2032)

Working Current:<5mA

Standby Current: <2μA

Standby Time: 2 years

Remote Distance:30m(Barrier-free space)

 

Environment

Operation Temperature:-30℃~+55℃

Case Temperature(MAX.):+85℃

Waterproof Rating: IP20

 

Safety and EMC

EMC Standard (EMC): EN301 489,EN 62479

Safety Standard(LVD): EN60950

Radio Equipment(RED): EN300 328

Certification: CE,EMC,LVD,RED

 

Warranty and Protection

Warranty: 5 years

 

Specifications Download     

 

Standards and Certifications