| Select Input Voltage: | 110V±20% (US, CA) (Base), 220V±20% (EU, UK, AU) (Base) |
|---|---|
| Select Plug Type: | US (Base), UK (Base), EU (Base), AU (Base) |
| Availability | In Stock |
| Condition | Brand New |
This High voltage Dimmer EU Plug LED controller with RF remote control, you could adjust light to the appropriate lighting brightness in accordance with your actual need. 110/220V Input, output 600W. Applicable to 50 (164ft) RGB color changing high voltage flexible led light strips. Free sent high voltage led strip accessories.
Product Specification
Controller
Controller Type: High Voltage Led Controller
Input Voltage: 110/220V
Output Watts: 600W
Connection mode: common anode G+RB output (If you need other line output, please contact us)
Control mode: infrared remote control
Application: Hight Voltage RGB color change led strip lights.
Output:: 3 circuits (R / G / B)
Dimension: L90 * W70 * H28
Gross Weight/Package: 350g
Receiving range: 20meters
IR Remote Control
Power supply: 23A battery
Cover material: ABS
Fabrication processing: multicolour printing & UV varnish
Functions of Keys
1. Key 1: on / off
2. Key 2: light changing mode (15 modes)
3. Key 3: color light / white light switching mode
4. Key 4: turn up (brightness / speed)
5. Key 5: turn down (brightness / speed)
How to use
1. Press Key 1 to turn on / off in any state.
2. Press Key 2 to activate light changing mode, keep pressing for different programs. There are 15 programs in total.
3. Press Key 3 once to activate white light mode, you can change brightness by pressing Key 4 or Key 5.
Press Key 3 twice to activate color ring, changing brightness by pressing Key 4 / Key 5 or changing light color by touching the color ring.
4. Resume function. The previous settings will be resumed while power on again.
5. To match the remote control to the receiver (You do not need to do this when first out the box). Press Key 4 once when first switched on within 3 seconds.
The light will blink 3 times to indicate that the remote control is matched Clearing Code
Press Key 4 five times when first switched on, again, the light will blink 6 times if clearing is successfull
Connection Diagram
Applications
Back/task lighting
Cove LED lighting
Retail LED lighting
Display case LED lighting
Accent LED lights
Under cabinet lighting
led stage lighting
Note
A. is 110V/220V power input, the output high voltage 110/220 v article lamp directly. Article 110/220 v meet in the same line, at the same time electricity.
B. should be in strict accordance with the wiring. Red, green, black and blue four lines, the black line is the line. Otherwise the color with the remote control signal may not to be relatively color or out of sync.
C. the quality assurance for one year. Artificial damage or misuse damage is not within the warranty.
D. can theoretically with the highest 5050-60 light RGB light 50 meters.(according to the measured, to achieve ideal control effect, suggested that connect 3528 RGB colorful lights with 50 m or 5050 RGB lights with 30 meters)
Safety
Supply input voltage of this product is AC110/220V.
Shorting output wires my cause damage to dimmer.
Always observe proper polarity when connecting high voltage led strip lights and load.
For indoor use only - this product is not waterproof or weatherproof.
Package including
1 x High Voltage led dimmer controller
1 × RF wireless remote control
1 x Piece of User's Manual