Spec Sheet - FSLSR-15MM-2835X2400

Select Connector Type:	2-pin Bare Wire (Base), Waterproof Wires (Base), Waterproof Fast Connectors
Select Length:	16.4ft (5 meters) (Base)
Select Light Color :	Warm White(3000K) (Base), Cool White(7000K), Natural White(4000K) (Base), Daylight White(6000K) (Base)
Select Operating Voltage:	12VDC (Base), 24VDC (Base)
Select Waterproof Rating:	Non-Waterproof IP20 - Adhesive Back (Base), Outdoor Silicone Tube IP67 - With Brackets, Outdoor Silicone Tube IP67 - Adhesive Back
Availability	In Stock
Condition	Brand New

Features

[High efficiency and energy saving]: using high-quality 2835 SMD LEDs, ultra-low power consumption, electro-optical power conversion close to 100%, more than 80% energy saving than traditional light sources

[Safe and reliable]: low heat, no heat radiation; cold light source, low voltage, effective protection of people and objects

No eye damage: DC work, no UV, no flicker, no eye damage

[High color rendering]: using high-brightness SMD LED as the light-emitting element, white light color rendering performance is good, the color rendering index can reach 90

[2835LED lamp beads]: Use Taiwan imported light-emitting chips, high luminous efficiency and long life, uniform color, good consistency

[Double-layer circuit board]: Double-layer pure copper FPC flexible ultra-thin circuit board is used, which has good electrical and thermal conductivity to ensure a long life.

[Red and black wire positive and negative poles]: Red and black wire positive and negative poles, each section of the lamp belt joint position is all welded and reinforced with heat shrinkable tube, which is more firm

[Flexible and resistant to bending]: The flexible FPC circuit board is used, and the light strip is flexible and resistant to bending. It can be bent at 180° without affecting the normal use of the light strip. It is suitable for various shapes of lighting decoration

[Can be cut]: three lights and one circuit, three lights and one cut, easy to use, you can cut any length you need, use it in every corner of the home, avoid waste

[Adhesive]: Ultra-thin 3M strong double-sided adhesive, strong adhesion, easy to install

[Easy installation]: Due to the light and thin lamp characteristics, it can be installed without professionals, and the light-emitting angle can be adjusted with the installation environment.

For colored single color like red, green, and blue, it needs a min quantity of 50m/164ft to produce. Please check FSLDR-12V-2835X1200X17 and FSLDR-20MM-2835X2400 if you need the color lights.