| Availability | In Stock |
|---|---|
| Condition | Brand New |
The LED Amplifier cannot be used alone. There is no dimming knob on it. It can only be used with a dimmer. The dimmer can be dimmed using the knob button or the RF remote control. Suitable for KTV, hotel, stage and home decoration lights adjustment.
Specification
Size: 62*98*21mm
Voltage:DC5-24V
Output: 30A
Dimmer Type: PWM
Packaging
1 x LED Amplifier
Standards and Certifications
Wiring scenario : For example, if there are more than two 400W transformers, but the actual light source power is within 300W, then use a dimmer to cascade countless sub-controllers. The sub-controller is also called an amplifier, and all the sub-controls are controlled by the dimmer.
Note: The power connection is 220V input. Please strictly follow the correct installation and test wiring. If you connect the wrong wire, it will burn the power supply and cause safety hazards.
Wiring instructions: Pay attention to the wiring, the dimmer cannot be connected to high voltage, it is connected to the back of the transformer, 12-24V is common. The input and output of the dimmer are divided into positive and negative poles. If the connection is wrong, it won't work. Please connect the wires correctly according to the instructions.
Installation note:
1. Connect the load line first, then the power supply; make sure that there is no short circuit between the connecting lines before powering on
2. The dimmer can be dimmed by pressing the button or by the remote control (supports remote control light function)