| Availability | In Stock |
|---|---|
| Condition | Brand New |
The BC-R4-WP has been discontiuned, please check out the GL-C-012WL WLED 5-in-1 outdoor controller, WL5-WP smart 5-in-1 controller, or LS2-WP RF 5-in-1 controller for replacement.
Welcome to use our waterproof RGBW controller, it adapts to PWM(Pulse-Width Modulation)digital brightness control technology. It can be controlled by the wireless touch remote controller. Seeing is believing. The power supply is compatible with all major brands of dimming system interfaces, and supports linear dimming or logarithmic dimming. With short-circuit protection, over-current protection and power-off memory function. This led controller is suitable for RGB&RGBW LED lamp, easy to use.
Power Source Selection:
The power source must be a DC constant voltage type of power supply. Due to the efficient output in some power supplies are only 80% of the total, so please select at least 20% higher output power supply than the consumption of LED lights.
Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
1. To reduce the risk of component damage and fire caused by a short circuit, make the sure correct connection
2. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
3. Check if the voltage and power adapter suit the controller (please select DC12-24V power supply with constant voltage)
4. Don’t connect cables with power on; make sure a correct connection and no short circuit checked with the instrument before power on.
5. Please don’t open controller cover and operate if problems occur.
Standards and Certifications
Specifications Download 
Power Supply Specification
Working voltage: DC12-24V
Max Output Current: RGBW:5A×4CH
Max output power: RGBW:60Wx4CH (12V)
RGBW:120W×4CH (24V)
Grey scale: 4096 levels×4
Work temp: -20-55℃
Dimension: L173*W45*H25mm (wire not included)
Remote Specification
Working voltage: DC3V
Max Output Current: 433.92MHz
Product size: L106×W56×H9(mm)
Work temp: -20-55℃
Control Distant: 40m-50m
2. Two pushbuttons description
The first button controls the RGB channel
1. Short press(< 0.5s), master switch;
2. Short press ON/OFF button two times(within 0.5s+0.5s), changing program between static color and dynamic color changing.
3. In the static color program, long press to change the brightness, long press again for the opposite direction, totally of 8 levels, 1s for one level.
4. In color changing program, long press to change the speed, long press again for the opposite direction, totally of 8 levels, 1s for one level.
The second button controls the W light.
1) Short press(<0.5s) to switch the light on/off;
2) Long press(>0.5s) to adjust the brightness of white light, within 1%~100%. After the adjustment, the change goes the opposite.
3) When the white light is off, long press to turn it on and dim.
Safety warnings
Please don’t install this controller in lightening, intense magnetic, and high-voltage fields.
1.To reduce the risk of component damage and fire caused by a short circuit, make sure the correct connection
2.Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
3.Check if the voltage and power adapter suit the controller
(please select DC5-36V power supply with constant voltage)
4.Donot connect cables with power on; make sure a correct connection and no short circuit checked with the instrument before power on.
5.Please don’t open the controller cover and operate if problems occur.
The manual is only suitable for this model; any update is subject to change without prior notice.
After-Sales
From the day you purchase our products within 3 years, if being used properly in accordance with the instruction, and quality problems occur, we provide free repair or replacement services except for the following cases:
1.Any defects caused by wrong operations.
2.Any damages caused by an inappropriate power supply or abnormal voltage.
3.Any damages caused by unauthorized removal, maintenance, modifying circuit, incorrect connections, and replacing chips.
4.Any damages due to transportation, breaking, flooded water after the purchase.
5.Any damages caused by earthquake, fire, flood, lightning strike, etc force majeure of natural disasters.
6.Any damages caused by negligence, inappropriate storing at high temperature and humidity environment, or near harmful chemicals.
Kindly Reminder
Power Source Selection:
The power source must be a DC constant voltage type of power supply. Due to the efficient output in some power supplies are only 80% of the total, so please select at least a 20% higher output power supply than the consumption of LED lights.