| Select Colour: | Black (Base), White (Base) |
|---|---|
| Availability | In Stock |
| Condition | Brand New |
Navigating sharp corners is a common challenge in LED strip installations. Bending a strip too tightly can damage the circuitry, leading to flickering or dead sections. The SuperLightingLED L-Shape 4-Pin Corner Connector is the perfect solution, allowing you to create flawless 90-degree turns without any soldering. Specifically designed for 10mm wide 4-pin 5050 RGB LED strips, this connector uses a simple and secure buckle system. Just open the clasp, insert your strip, and snap it shut for a reliable connection that maintains signal integrity. Available in both black and white, it provides a clean, professional finish for any project, from intricate under-cabinet lighting to architectural accenting. Knowing how to choose LED strip light connectors is key, and this L-shape piece is essential for any setup with right angles.
Effortlessly create clean, sharp right-angle turns without bending or damaging your LED strip.
Features a user-friendly snap-down buckle that provides a secure, reliable connection in seconds—no tools or soldering required.
Engineered for standard 10mm wide, 4-pin RGB LED strips, including popular SMD 5050 and 3528 models.
The internal prongs and secure clasp ensure consistent power and signal transmission for uniform color and brightness across the connection.
Available in both black and white to seamlessly blend with your LED strip's PCB or mounting surface for a professional finish.
| Parameter | Details |
|---|---|
| Model | RGB-ACCESSORIE-027 |
| Product Type | L-Shape Corner Connector |
| Shape | 90-Degree Right Angle |
| Pin Count | 4 |
| Compatible PCB Width | 10mm |
| Compatible LED Strip Type | 4-Pin RGB (e.g., SMD 5050, 3528) |
| Connection Method | Solder-Free Buckle / Clasp |
| Housing Material | Plastic |
| Internal Material | PCB Board with Copper Contacts |
| Available Colors | Black, White |
| Working Voltage | DC 3V ~ 24V |
| IP Rating | IP20 (Indoor Use Only) |
Q: Do I need to solder anything to use this connector?
A:No, this is a completely solder-free connector. It features an easy-to-use clasp that securely clamps onto the LED strip's copper pads.
Q: Will this work with my RGBW (5-pin) or RGBCCT (6-pin) LED strips?
A:No, this is a 4-pin connector designed specifically for standard RGB LED strips. You will need a connector with the correct number of pins for RGBW or RGBCCT strips.
Q: Is this connector waterproof for outdoor use?
A:This connector is rated IP20 and is not waterproof. It should only be used in dry, indoor locations.
Q: Can I use this with an 8mm wide LED strip?
A:No, this connector is precisely designed for 10mm wide LED strips. Using it with an 8mm strip will result in a loose and unreliable connection.
Q: Why use a corner connector instead of just bending the LED strip?
A:Forcing a sharp 90-degree bend in an LED strip can damage the delicate circuitry and individual LEDs, causing that section to fail. A corner connector creates a safe, reliable turn without putting stress on the strip itself.
Q: How do I choose between the black and white color options?
A:For the cleanest installation, choose the color that best matches your LED strip's PCB color or the surface you are mounting it on. This helps the connector blend in seamlessly.
Q: What should I do if my lights are flickering after installation?
A:Flickering is usually caused by a poor connection. Disconnect the power, open the connector's clasp, and ensure the strip is fully inserted with the copper pads making solid contact with the metal prongs before closing it again.