| Availability | In Stock |
|---|---|
| Condition | Brand New |
Navigate sharp corners and create flawless 90-degree turns in your waterproof lighting setup with the SuperLightingLED L-Type 4-Pin Solder-Free Connector. Specifically engineered for 10mm wide, IP65-rated RGB LED strips with an epoxy resin coating, this connector eliminates the need for complex soldering. It provides a simple, secure, and reliable solution for routing your strip lighting around cabinets, shelves, coving, and architectural features. The intuitive clip-down design ensures a strong mechanical and electrical connection, maintaining perfect color consistency and signal integrity throughout your RGB LED strip run. This makes it an essential accessory for both professional installers and DIY enthusiasts looking to achieve a clean, professional finish on their custom lighting projects.
Effortlessly create clean, sharp 90-degree angles for a professional and continuous lighting effect.
Uniquely designed to connect 10mm 4-pin RGB LED strips that have a protective epoxy or glue coating on top.
Features a simple open-and-close clasp system for a fast, secure connection without any soldering or special tools.
Ensures perfect alignment and continuity for all RGB color channels and the positive line, preventing color distortion.
The robust clasp pierces the strip from the back to make a firm, lasting connection that resists vibrations and movement.
| Parameter | Details |
|---|---|
| Model | RGB-ACCESSORIE-028 |
| Product Type | L-Shape Solderless Connector |
| Shape | 90-Degree Corner (L-Type) |
| Compatible Strip Width | 10mm |
| Compatible Strip Type | 4-Pin RGB LED Strip |
| Waterproof Compatibility | IP65 (Epoxy Resin / Glue Coated Surface) |
| Pins | 4 |
| Installation | Solder-free, Clip-on |
| Material | Flame-retardant PVC Plastic |
| Color | White |
| Working Voltage | DC 3V-24V |
| Max Current (Rated) | < 5A |
Q: Is this connector itself waterproof?
A:No, the connector is not waterproof (non-IP rated). It is designed to connect IP65 strips, but the connection point itself should be protected from direct moisture if used in a damp environment.
Q: Will this work with non-waterproof (IP20) LED strips?
A:This connector is specifically designed for the thickness of IP65 epoxy-coated strips. For non-waterproof strips, we recommend using connectors designed for IP20 strips to ensure a proper and secure fit.
Q: Do I need to solder anything for installation?
A:No, this is a completely solder-free connector. It uses a secure clasp system to make the electrical connection, making installation quick and easy.
Q: Can I use this for RGBW (5-pin) or single-color (2-pin) strips?
A:No, this connector is specifically designed with four pins for standard RGB LED strips. It is not compatible with 2-pin, 3-pin, or 5-pin strips.
Q: How do I remove the epoxy coating from my IP65 strip?
A:Use a sharp craft knife to carefully score and peel back the clear epoxy layer from the top of the copper contact pads. Be careful not to cut into the circuit board itself.
Q: What does the 10mm specification refer to?
A:The 10mm refers to the width of the flexible Printed Circuit Board (PCB) of the LED strip light. Please measure your strip's width to ensure it is 10mm before purchasing.