Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 3920

10mm 4Pin solder-free stripping buckle waterproof IP67 connector hippo buckle board to wire suitable for RGB casing LED Strip Light

MODEL: RGB-ACCESSORIE-030
Price based on selections below:
$1.69
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Simplify your outdoor and wet-location lighting projects with the 10mm 4-Pin Solderless IP67 Waterproof Connector. This robust connector eliminates the need for tedious soldering, offering a fast and reliable solution for connecting your encased RGB LED strip lights to power wires. Its unique 'Hippo buckle' design features sharp piercing contacts that create a secure, weatherproof seal, ensuring your connections are protected against dust, rain, and moisture. Ideal for landscape, patio, and bathroom installations, this board-to-wire connector is the professional choice for durable, long-lasting RGB lighting systems. Say goodbye to complex wiring and hello to a quick, dependable, no solder led strip solution.

Key Features

IP67 Waterproof Rating

Provides a robust, dust-tight, and water-resistant seal, perfect for outdoor installations and damp environments.

Solder-Free Piercing Connection

The innovative 'Hippo buckle' design pierces the LED strip's protective casing for a secure connection without any soldering.

RGB Strip Compatibility

Specifically engineered for 10mm wide, 4-conductor RGB LED strip lights, ensuring proper alignment and function.

Board-to-Wire Design

Allows you to easily connect the end of an LED strip segment directly to a power source or an RGB LED controller.

Durable & Reusable

Constructed from high-quality, transparent polycarbonate that is tough enough for demanding jobs and can be reopened if needed.

Technical Highlights

  • Sharp copper pins ensure excellent conductivity by piercing directly into the strip's circuit board.
  • A secure clamping mechanism holds the strip firmly in place, preventing accidental disconnection.
  • Transparent body allows for visual confirmation of correct strip alignment before closing the buckle.

Product Specifications

ParameterDetails
ModelRGB-ACCESSORIE-030
Product TypeSolderless Waterproof Connector
Connection TypeStrip/Board to Wire
IP RatingIP67
Compatible Strip Width10mm
Pin Quantity4
Compatible Strip TypeWaterproof Casing RGB LED Strips
Housing MaterialPolycarbonate (PC)
Contact MaterialCopper
ColorTransparent
Max Voltage24V DC
Max Current5A

Application Scenarios

Outdoor & Landscape Lighting Create stunning, weather-resistant lighting for decks, patios, gardens, and building facades. This IP67 connector for led strip 4pin ensures your connections withstand rain, sprinklers, and humidity, keeping your outdoor RGB displays vibrant year-round.
Bathroom & Kitchen Installations Safely install RGB accent lighting in areas with high moisture, such as under cabinets, around mirrors, or in shower niches. The waterproof seal protects connections from steam and splashes, ensuring safety and longevity.
Marine & Automotive Customization Perfect for adding custom RGB lighting to boats, RVs, and other vehicles. The secure, vibration-resistant connection and waterproof design make it ideal for challenging mobile environments.

How to Use This Solderless Connector

  1. Ensure the power supply is turned off before starting.
  2. Open the transparent buckle of the connector.
  3. Take your 10mm 4-pin waterproof RGB strip. There is no need to remove the silicone casing.
  4. Carefully slide the end of the LED strip into the connector, ensuring the four copper pads on the strip align perfectly with the four piercing pins inside.
  5. Push the strip in until it hits the internal guide stop.
  6. Firmly press the transparent buckle down until it clicks securely shut. This action drives the pins through the strip, making the connection.
  7. Connect the bare wire ends to your power supply or controller, observing correct polarity.
  8. Briefly power on the system to test the connection before final installation.
⚠ Precautions
  • Double-check that the strip's copper pads are aligned with the connector's pins before closing.
  • This connector is specifically designed for 10mm 4-pin RGB strips with a waterproof silicone or plastic casing. It may not provide a secure fit for non-waterproof (IP20) strips.
  • Ensure the buckle is fully snapped shut on all sides to guarantee the IP67 waterproof seal.
  • Do not exceed the maximum rated voltage (24V) or current (5A) to prevent damage.

What's in the Box

  • ✓1x 10mm 4-Pin Solderless IP67 Waterproof Connector (Model: RGB-ACCESSORIE-030)

Frequently Asked Questions

Q: Do I need to solder led light strips with this connector?

A:No, this is a completely solder-free connector. Its 'Hippo buckle' design uses sharp pins to pierce the strip and create a secure electrical connection.

Q: How waterproof is this four pin led connector?

A:When installed correctly with the buckle fully closed, it achieves an IP67 rating, meaning it is dust-tight and protected against temporary water immersion.

Q: What type of LED strip does this work with?

A:This connector is specifically designed for 10mm wide, 4-pin RGB LED strip lights that have a waterproof casing (like silicone tubing or coating).

Q: Can I use this for a corner turn?

A:This is a straight, board-to-wire connector. For corners, you would use this to add a wire lead and then use the flexible wire to make the turn.

Q: Is the connector reusable?

A:Yes, you can carefully open the buckle to remove or reposition the strip. However, repeated use may affect the waterproof seal's integrity.

Q: Will this work with an 8mm or 12mm wide strip?

A:No, it is precisely engineered for 10mm wide strips. Using it with other sizes will result in a poor connection and will not be waterproof.

© 2026 SuperLightingLED. All specifications are subject to change without notice.