HC100 DC5-24V Single Channel Full-color Signal Amplifier for Extending The Signal Transmission Distance

HC100 signal amplifier, widely used for digital pixel light project.In the main picture, we show you the internal structure of the signal amplifier, which is divided into parts, the power interface, which is the amplifier power supply, the signal input terminal and the signal output terminal. The main function of this amplifier is the problem of signal weakening during transmission. It has a gain effect and can be used for large and medium-sized LED projects for long-distance transmission. It is suitable for addressable RGB led strip light, NOT COMPATIBLE with addressable RGBW strips.

[ VIDEO: Watch on YouTube ]

Connection Instruction

Input side:

ICLK -input clock signal, if your light is single cable type, like 2811, 2812, 6812, 1903, 1903, 16703, etc., no need to use this socket.

IDAT -input data signal

IGND-input GND

Output side:

CLK -output clock

DAT -output DATA

GND -output GND

GND( beside 5-24V) -power negative

5-24V -power positive

Installation Tips:

1. The maximum line length of the controller output port and the amplifier input port is 200 meters. If it exceeds 200 meters, please test or use the fiber.

2. The length of the input port of the amplifier and the input of the lamp should not exceed 5 meters.

3. When the lamp group is 12V-24V, the RT is open, and when the lamp group is 5V, the RT is connected.

4. It is forbidden to operate with electricity. Before installation, it must be powered off and the joints should be waterproof.