Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 3989

Rotary Panel LED RF Remote(CR2032 Battery) T1-KB

MODEL: T1-KB
Price based on selections below:
$18.98
Select Mask Color:Black (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Features

 Rotary glass panel RF remote, apply to a single color, dual color, or RGB LED controller.

● Rotate the knob to change RGB color, color temperature, or brightness,

 support long press or twice click operation.

● Each remote can match one or more receivers.

● CR2032 battery powered.

● White & Black glass panel available.

 

Technical Parameters

Input and Output

Output signal: RF(2.4GHz)

Working voltage: 3VDC(CR2032)

Working current: <5mA

Standby current: <10μA

Standby time: 1 year

Remote distance: 30m(Barrier-free space)

 

T1-KBPDF

 

Standards and Certifications

CE FCC  RoHS ISA SGS ISO  warranty-5-year

 
Rotary Panel LED RF Remote(CR2032 Battery) T1-KB - photo 1WRotary Panel LED RF Remote(CR2032 Battery) T1-KB - photo 2

Safety and EMC

EMC standard (EMC): EN301 489,EN 62479 

Safety standard(LVD): EN60950

Radio Equipment(RED): EN300 328

Certification: CE,EMC,LVD,RED

Warranty

 Warranty: 5 years

 

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing the battery, pay attention to the battery's positive and negative polarity.

 A long time without the remote control, remove the battery.

 When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

 

Match Remote Control (two-match ways)

End-user can choose a suitable match/delete ways. Two options are offered for selection:

 

Use the controller’s Match key

Match:

Short press match key, immediately push the knob. The LED indicator fast flash a few times means match is successful.

 

Delete:

Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.

 

Use Power Restart 

Match:

Switch off the power, then switch on power again, immediately push the knob 3 times. The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power again, immediately push the knob 5 times. The light blinks 5 times means all matched remotes were deleted.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.