| Availability | In Stock |
|---|---|
| Condition | Brand New |
This is a PIR motion sensor LED stair light controller that allows you to intelligent control your stairway lighting. The PIR motion sensor allows the stair lighting to turn on automatically when it detects movement, and turn off when the motion stops.
This device has 32 channels, which means it can control up to 32pcs individual LED strip lights. You can connect the stair controller to either single-color LED strips or addressable running water LED strips, depending on the type of lighting effect you want to achieve.
You can choose white or other solid colors to illuminate your staircase. If you opt for running water LED strips, you can create more dynamic and visually appealing lighting effects.
There are three lighting modes that the controller can achieve, one is step-by-step, one is all-lights-on, and one is auto-cycle. Speed, brightness, and time delay can be adjusted.
| Level | Speed | Brightness | Time Delay |
| 1 | 0.2s | 10% | 3s |
| 2 | 0.4s | 20% | 10s |
| 3 | 0.6s | 40% | 30s |
| 4 | 0.8s | 50% | 1min |
| 5 | 1s | 60% | 5min |
| 6 | 1.2s | 70% | 10min |
| 7 | 1.4s | 80% | 15min |
| 8 | 1.6s | 100% | 20min |
Set stair tread light quantity:
Long press the SPEED key to enter the setting, default the first and the second step lights are lighted up; press the SPPED key to increase the lights, and press the DELAY key to decrease the lights.
Switch modes:
Default mode is mode 1 - step by step lighted up; press the BRIGHTNESS key to switch mode 2 - all lights on; and then press the BRIGHTNESS key to switch mode 3 - cycle. After operation, it will auto save and exit this setting.
Set digital led strip IC length:
Long press the DELAY key to enter the setting, default the first and the second step lights are lighted up; press the SPPED key to increase the lights, and press the DELAY key to decrease the lights.
Set digital led strip sequence:
Switch the stair light mode to mode 3, lomg press the SPEED and DELAY keys at the same time to enter the setting state, default RGB. Press the BRIGHTNESS key to switch to the next sequence. When you have finished setting up, no operation within 5 seconds, it will auto save your setting.
Note: if the set sequence is compatible with your current use strip lights, the running water effect is smooth; otherwise the lights will be lit up jumpy.
Product Advantage:
• Adaptable solutions for different types of stairs
• Complete equipment can be built in new buildings or existing stairs
• Multiple choices of quantity and size
• Customizable options to match surrounding designs
• Energy-saving LED lights and aesthetic design
• Lights up only when needed
• The lighting effect makes the stairs an architectural feature of the space
• Regardless of the width of the steps, the stairs can be illuminated.
• The kit is easy to install and use
• Programmable control unit, which can adjust the lighting conditions according to your preferences and environmental needs
• Lights are automatically turned on and off when needed
Standards and Certifications
Technical Parameters
Max power: 400W/32CH, 36W/CH
Output voltage: DC 12-24 V
Ingress protection: IP20
Housing material: Plastic
Number of step control: 32 steps
Color: White
Lifespan: 50,000 hours
Speed type: dimmable
Packing list:
1*32 steps LED stair controller
2* sensor controller
2pcs*Connector line
2*5m/16.4ft Induction extension cord
30* 2pin LED fast connectors(the distance of the needle between the 2pin LED fast connectors is 2.54mm)
if you have additional requirements or questions, please contact us or remarks before you pay for the order.
Effect Display:
