AC180~264V LPH-18-24 Input Mean Well High-efficacy Waterproof DC24V 18Watt UL-Listed LED Display Lighting Power Supply

Note: The AC input voltage of the LPH-18-24 and LPH-18-36 waterproof power supply models is 180 to 264VAC. (Not UL listed)

Main features

180 to 264VAC AC input voltage

Fully enclosed plastic shell, in line with IP67 protection standard

With short circuit protection/overload protection/overvoltage protection/overheat protection

International safety certification: TUV/CB/CE

Constant pressure working mode

Class II input, no shell grounding terminal

Can withstand 300VAC surge input for 5 seconds

Pass the LPS (Limited Power Supply) test

100% full load burn-in test

Adopt lead-free process, comply with environmental RoHS requirements

Taiwan Mingwei brand, produced in Guangzhou factory

2 years warranty

Main parameters

DC output range 24V, 0 to 0.75A

Output voltage accuracy ±3%

Ripple 150mV

Efficiency 82%

Input voltage range 180 to 264VAC/254 to 370VDC

Input surge current cold start, 50A/230V

Leakage current <0.25mA / 240VAC

Overload protection, cut off more than 105% of the rated current, automatic detection, automatic recovery

Over-voltage protection The output voltage will be cut off when the rated output voltage is 115% to 135%, and the diode clamped

Overheating protection When the internal temperature of the transistor exceeds 170℃, it will recover after cooling down

Start up hold time 1500ms, 30ms, 20ms at 230VAC full load

Insulation characteristics between input and output: 3KVAC

Working temperature -30 to +70℃ (see output derating curve)

Vibration resistance 10 to 500Hz, 2G 10 minutes/cycle, 60 minutes for each axis of XYZ

Safety certification TUV EN60950-1, EN61347-1, EN61347-2-13, IP67 certification passed; design refer to UL1310 Class2, CAN/CSA-C22.2 No.223-M91

Electromagnetic compatibility standards Emission: EN55022 (CISPR22) class B FCC part 15, Harmonics: EN61000-3-2 class A, EN61000-3-3

Electromagnetic compatibility standards Anti-interference: EN61000-4-2,3,4,5,6,8,11, EN55024, Class A light industry standard

Mean time between failures ≥1.206 million hours, MIL-HDBK-217F (25℃)

Wiring mode Input/output: UL standard, 18AWG×2C(30cm)