LPV-20-24 20Watt AC90～264V Input Mean Well High-efficacy Waterproof DC24V UL-Listed LED Display Lighting Power Supply

Features:

Constant voltage design

Universal AC input/ Full range

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit 1 Over load / Over voltage

Cooling by free air convection

Small and compact size

Fully encapsulated with IP67 level (Note.7)

Fully isolated plastic case

Class I power unit, no FG

Class 2 power unit

Pass LPS

Suitable for LED related fixture or appliance

(such as LED Decoration or Advertisement devices

100% full load burn-in test

Low cost, high reliability

2 years warranty

Main parameters:

DC voltage:  DC24V

Rated current:  0.84A

Current range:  0-0.84A

Rated power:  20.2W

Output voltage accuracy ±5%

Ripple 150mV

Efficiency 81%

Input voltage range 90 to 264VAC/127 to 370VDC

Input surge current Cold start, 70A/230V

Leakage current <0.25mA / 240VAC

Overload protection The over current point is 110% to 150%, automatic detection, automatic recovery

Over-voltage protection The output voltage will be cut off when the rated output voltage is 115% to 135%, and the diode clamped

Start up hold time 500ms, 20ms, 50ms at 230VAC full load

Insulation characteristics between input and output: 3KVAC

Working temperature -30 to +70℃ (see output derating curve)

Vibration resistance 10 to 500Hz, 2G 10 minutes/cycle, 60 minutes for each axis of XYZ

Safety certification through UL879, UL1310, CSA-C22.2 No.207-M89; CAN/CSA-C22.2 No.223-M91, TUV EN60950-1, IP67 certification

Electromagnetic compatibility standards Emission: EN55022 (CISPR22) class B Harmonics: EN61000-3-2 class A, EN61000-3-3

Electromagnetic compatibility standards Anti-interference: EN61000-4-2,3,4,5,6,8,11, EN55024, Class A light industry standard

Mean time between failures ≥786,500 hours, MIL-HDBK-217F (25℃)

Wiring mode Input/output: UL standard, 18AWG×2C(60cm)