What width of LED strip do these caps fit?

These end caps are specifically designed for any waterproof LED strip with a PCB width of 12mm.

Are these solderless connectors?

No, these are not solderless. They are designed to seal the end of an LED strip after you have soldered wires to it.

Will this cap work for a 4-pin RGB or 3-pin CCT strip?

Yes, absolutely. This cap's design is universal and works with any 12mm wide strip, regardless of the number of pins. Its purpose is to seal the strip itself, not connect the pins.

What should I use to seal the cap?

We strongly recommend using a neutral-cure silicone sealant to fill the cap. This creates a durable, fully waterproof seal without damaging the LED components.

Is this for the end of the strip with wires or the tail end?

This model has a hole, so it is designed for the end where you attach power wires, allowing the cable to pass through securely.

Why is this better than a standard end cap?

Our enhanced model is made from thicker silicone and has a more robust structure, providing a tighter fit and more reliable long-term waterproof performance compared to conventional caps.

Spec Sheet - SC-ACCESSORIE-024

Select Quantity:	4 PCS/Pack (Base)
Type of End Caps:	With Hole (Base)
Availability	In Stock
Condition	Brand New

Secure your custom LED lighting projects with our Enhanced 12mm Waterproof IP68 End Caps. This 4-pack is specifically designed for DIY enthusiasts who need to create a reliable, weatherproof seal on cut waterproof LED strip sections. After soldering wires to your strip, these thicker, robust silicone caps provide superior protection for the vulnerable connection point. They are universally compatible with any 12mm wide waterproof strip, whether it's a 2-pin single color model or a multi-pin CCT or RGB strip, ensuring your outdoor and wet-location installations remain stable and protected from the elements.

Key Features

Superior IP68 Waterproofing

Features a thicker, more robust design than standard caps for a durable, long-lasting seal against water and dust.

Universal 12mm Compatibility

Designed to fit all 12mm wide waterproof LED strips, regardless of pin count (2-pin, 3-pin, 4-pin, etc.).

Essential for DIY Soldering

The integrated wire hole makes this cap perfect for custom projects where you need to solder new lead wires to a cut strip.

Protects Solder Joints

Shields the delicate solder connection from moisture ingress, corrosion, and physical strain, ensuring stable performance.

Convenient 4-Pack

Each package includes four end caps, providing great value for projects with multiple cuts or for future use.

Product Specifications

Parameter	Details
Product Model	SC-ACCESSORIE-024
Product Type	Waterproof End Cap Connector
Package Contents	4 PCS/Pack
IP Rating	IP68
Compatible Strip Width	12mm
Cap Type	With Hole for wire pass-through
Connection Method	Soldering Required (Not Solderless)
Material	High-Grade Silicone
Pin Compatibility	Universal (2-pin, 3-pin, 4-pin, etc.)

Ideal for Custom Waterproof Lighting

Outdoor Landscape & Architectural Lighting Perfect for creating custom-length lighting runs for gardens, pathways, decks, and building facades. These caps ensure every connection point is fully protected from rain, sprinklers, and humidity.

Marine & Pool Area Installations Use these to reliably seal LED strips installed on boats, docks, or around pool and spa areas. The IP68 rating provides the necessary protection against splashes and high-moisture environments.

DIY LED Projects An essential component for any DIYer building custom fixtures or signage with waterproof LED strips. These caps provide a professional, clean, and secure finish to your soldered connections.

How to Use These Waterproof End Caps

Cut your 12mm waterproof LED strip to the desired length.
Carefully solder your waterproof power wires to the copper pads at the cut end of the strip.
Thread the newly soldered wires through the hole in the IP68 end cap.
Slide the end cap over the cut end of the LED strip, ensuring it fully covers the solder joint.
Fill the cap with a high-quality, neutral silicone sealant (not included) to create a complete waterproof bond. Allow the sealant to fully cure according to the manufacturer's instructions before exposing to moisture.

Enhanced 12mm Wide Waterproof IP68 LED Strip Light Connector

⚠ Precautions

This product is designed for users comfortable with soldering. It is not a solderless connector.
For a complete IP68-rated seal, you must use waterproof-rated wires and a suitable neutral silicone sealant (not included).
Ensure the cap is fully seated and the sealant has completely filled the internal cavity before curing.

What's in the Box

✓4 x Enhanced 12mm IP68 Waterproof End Caps with Hole

Enhanced 12mm Wide Waterproof IP68 LED Strip Light Connector 4PCS Package