0/1-10V WiFi + RF + Push Dimmer L1(WT)

Features

● WiFi + RF + AC push 0/1-10V dimmer, 1 channel output.

● Output 1 channel 0/1-10V signal, connect with 0/1-10V dimmable driver.

● Tuya APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene function.

● Voice control, support amazon ECHO and TmallGenie smart speaker. ● 0-10V or 1-10V output selectable by DIP switch.

● 256 levels 0-100% dimming smoothly without any flash.

● Compatibility with RF 2.4G single zone or multiple zone dimming remote control. ● Each L1(WT) controller can also work as WiFi-RF converter, then use Tuya APP to control one or more RF dimming LED controller or driver synchronously.

● Connect with external push switch to achieve on/off and 0-100% dimming function.

● Easy to be placed in standard wall junction box behind a push switch.

Technical Parameters

Input voltage: AC100-240V

Output signal: 0/1-10V (20mA)

Certification: CE,EMC,LVD

Dimming data

Input signal: Tuya APP + RF + Push Dim

RF Control distance: 30m(Barrier-free space)

Dimming level: 256 levels

Dimming range: 0 -100%

Warranty: 5 years

IP rating: IP20

L1(WT)

Note:

1.The above distance is measured in spacious
(no obstacle) environment, Please refer to the actual test distance before installation.

2.Please check if the WiFi router net in 2.4G band, the 5G band is not available, and do not hide your router network. 3. Please keep the distance between L1(WT) devices and router close, and check the WiFi signals.

Note: We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces, 

 The maximum length of the wires from dimmer to LED driver should be no more than 15 meters.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing the battery, pay attention to the battery's positive and negative polarity.

 A long time without the remote control, remove the battery.

 When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.