0/1-10V ZigBee + RF + Push Dimmer L1(WZ)

Features

● ZigBee + RF + AC push 0/1-10V dimmer, 1 channel output.

● Output 1 channel 0/1-10V signal, connect with 0/1-10V dimmable driver.

● Tuya APP cloud control, support on/off, brightness adjust, delay turn on/off light, timer run, scene function.

● Voice control, support amazon ECHO and TmallGenie smart speaker. ● 0-10V or 1-10V output selectable by DIP switch.

● 256 levels 0-100% dimming smoothly without any flash.

● Compatibility with RF 2.4G single zone or multiple zone dimming remote control.

● Each L1(WZ) controller can also work as ZigBee-RF converter, 

 then use Tuya APP to control one or more RF dimming LED controller or driver synchronously.

● Connect with external push switch to achieve on/off and 0-100% dimming function.

● Easy to be placed in standard wall junction box behind a push switch.

Technical Parameters

Input voltage: AC100-240V

Output signal: 0/1-10V (20mA)

Dimming data

Input signal: Tuya APP + RF + Push Dim

RF Control distance: 30m(Barrier-free space)

Dimming level: 256 levels

Dimming range: 0 -100%

IP rating: IP20

Warranty:  5 years

Certification: CE,EMC,LVD

L1(WZ)

Note:

2.Users must use the Tuya ZigBee gateway to realize remote control and voice control.

Note:  We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 5 pieces, 

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing the battery, pay attention to the battery's positive and negative polarity.

 A long time without the remote control, remove the battery.

 When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.