| Availability | In Stock |
|---|---|
| Condition | Brand New |
Please check the SK1 as an alternative.
1 Channel/RDM/Stand-alone function/Leading edge or trailing edge/Numeric display/Din rail
● AC phase-cut mosfet dimmer with DMX512 function, one channel output.
● Comply with the DMX512 standard protocols.
● Digital numeric display, set DMX decode start address by bottons.
● RDM function can realize intercommunication between DMX master and decoder.
● Reverse-phase dimming or forward-phase dimming selectable.
● Minimum brightness set from 1% to 40%.
● Stand-alone dynamic mode and dimmer mode selectable,
which be controlled by buttons with built-in programs, instead of DMX signal.
● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.
● Over-heat protection, recover automatically.
Technical Parameters
Input voltage: 100-240VAC
Output voltage: 100-240VAC
Output current: 1CH, 6A
Output power: 600-1440W
Certification: CE,EMC,LVD
Dimming data
Input signal: DMX512
Dimming level: 256 levels
Dimming range: 0 -100%
IP rating: IP20
Warranty: 5 years
Protection: Over-heat
Specifications Download 
Note:
1. When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used, the output power parameters can not be used. In addition, the maximum surge current of the dimmer is 65A, the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise, the product will be overloaded and damaged.
2. An DMX signal amplifier is needed when more than 32 decoders are connected, or use overlong signal line, signal amplification should not be more than 5 times continuously.
3. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W 90-120Ω terminal resistor at the end of each DMX signal line.
Caution:
Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged.
