Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-11-03 | ID: 456

LED 5050 RGB Strip Light Connector 4 Conductor 10 mm Wide Strip to Strip Jumper

MODEL: RGB-ACCESSORIE-006
Price based on selections below:
$0.85
Select PCB Width:10mm (0.39in) (Base), 12mm (0.47in)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create clean, flexible connections between sections of your 5050 RGB LED strips with our 4-Pin Strip-to-Strip Jumper Connector. Unlike rigid L or T-shaped connectors, this jumper provides a flexible wire bridge, perfect for navigating around corners, bridging gaps over cabinet seams, or creating custom angles in your lighting layout. The solderless snap-down design allows for a quick and secure connection without any special tools, making it ideal for both DIY enthusiasts and professional installers. Available in 10mm and 12mm widths, this connector ensures a reliable electrical link to maintain consistent color and brightness across your entire lighting project. Understanding how to choose the right LED strip light connectors is key to a flawless installation.

Key Features

Solderless Snap-Down Design

Achieve a secure, reliable connection in seconds without soldering, simply by snapping the clasps shut.

Flexible Jumper Wire

The insulated wire between the connectors allows for flexible bends and bridging gaps, perfect for custom installations.

Dual Width Compatibility

Available in both 10mm and 12mm options to perfectly match the PCB width of your 4-pin 5050 RGB strips.

Seamless Strip Extension

Easily connect two separate pieces of an LED strip to extend your run or utilize leftover segments.

Reliable 4-Conductor Link

Maintains a stable connection for all four channels (R, G, B, and +) to ensure accurate color rendering.

Technical Highlights

  • Precision-engineered for 4-pin 5050-type RGB LED light strips.
  • Clear polarity markings for easy and correct alignment.
  • Durable plastic housing protects the connection points.

Product Specifications

ParameterDetails
Product NameLED 5050 RGB Strip Light Connector 4 Conductor Strip to Strip Jumper
ModelRGB-ACCESSORIE-006
Connector TypeStrip-to-Strip Jumper
Number of Pins4
Compatible PCB Width10mm (0.39in), 12mm (0.47in)
Compatible LED Strip TypeSMD 5050 RGB LED Strips
Connection MethodSolderless, Snap-Down Clasp
Housing MaterialPlastic
Contact MaterialCopper

Application Scenarios

Custom Under-Cabinet Lighting Effortlessly bridge gaps over cabinet seams, sinks, or around appliances. This led strip to strip connector maintains a continuous lighting effect without dark spots.
Complex Cove and Architectural Lighting Navigate around structural beams, pillars, and other obstacles in cove lighting installations. The flexible jumper allows for custom angles that rigid strips cannot achieve.
DIY Backlighting and Signage Connect multiple short segments of RGB LED strip to create unique shapes for TV backlighting, custom signs, or artistic lighting projects. This rgb light strip connector makes complex designs simple.
Retail Display and Shelving Run lighting across separate display cases or down multiple levels of shelving from a single power run, using the jumper to create clean, hidden connections between units.

How to Use This 4-Pin Strip Jumper Connector

  1. Before you begin, ensure the LED strip's power supply is completely disconnected.
  2. Use scissors to cut your RGB LED strip light cleanly along the designated copper cut line.
  3. Open the white clasps on both ends of the jumper connector by gently prying them upwards.
  4. Carefully slide the end of one LED strip segment underneath the metal contact prongs inside the connector.
  5. Ensure the copper pads on the strip align perfectly with the connector's pins (+ to +, R to R, G to G, B to B).
  6. Press down firmly on the clasp until it snaps shut, securing the strip in place.
  7. Repeat steps 4-6 for the second strip segment on the other end of the connector.
  8. Gently tug on the strips to confirm a secure connection before restoring power to test the lights.
⚠ Precautions
  • This connector is designed exclusively for 4-pin RGB LED strips. It is not compatible with 2-pin single color, 5-pin RGBW, or other strip types.
  • Always select the connector width (10mm or 12mm) that precisely matches the PCB width of your LED strip for a proper fit.
  • Correct polarity alignment is critical. Mismatching the R, G, B, or positive terminals will cause incorrect color display or prevent the strip from lighting up.
  • These connectors are intended for indoor, dry locations only and are not waterproof.

What's in the Box

  • ✓1 x LED 5050 RGB Strip Light Connector Strip to Strip Jumper
[ VIDEO: Watch on YouTube ]
The flexible wire allows for custom angles and bends between LED strip sections.
LED 5050 RGB Strip Light Connector 4 Conductor 10 mm Wide Strip to Strip Jumper - photo 1
Demonstrating the strip-to-strip jumper connecting two segments of an RGB LED strip.
LED 5050 RGB Strip Light Connector 4 Conductor 10 mm Wide Strip to Strip Jumper - photo 2
Close-up of the solderless snap-down clasp for a secure 4-pin connection.

Frequently Asked Questions about 4-Pin LED Connectors

Q: Is this connector solderless?

A:Yes, this is a solderless led strip connector. It uses a simple snap-down clasp mechanism that requires no soldering or special tools for installation.

Q: Will this 4 pin led light strip connector work with my 5-pin RGBW strip?

A:No, this connector has only 4 pins and is designed specifically for standard RGB LED strips. It will not work with 5-pin RGBW or 6-pin RGBCCT strips.

Q: What is the difference between this jumper and an L-shape connector?

A:This jumper has a flexible wire between the two connectors, allowing you to create gaps or make bends at any angle. An L-shape connector creates a fixed, rigid 90-degree turn.

Q: How do I choose between the 10mm and 12mm versions?

A:You must measure the width of the bare printed circuit board (PCB) of your LED strip light, not including any silicone coating. Choose the connector size that exactly matches that measurement.

Q: Is this connector for rgb led strip waterproof?

A:No, this connector is designed for indoor use in dry environments only and does not have an IP rating for water resistance.

Q: Can I use this to connect two different brands of LED strips?

A:Yes, as long as both strips are 4-pin RGB, have the same PCB width (10mm or 12mm), and have compatible voltage ratings, you can connect them with this jumper.

 

© 2026 SuperLightingLED. All specifications are subject to change without notice.