Spec Sheet - RGB-ACCESSORIE-007

Select PCB Width:	10mm (0.39in) (Base), 12mm (0.47in)
Availability	In Stock
Condition	Brand New

Create a clean, reliable power connection for your lighting project with the RGB-ACCESSORIE-007 Single-End Quick Connector. This 12cm cable is the perfect solution for attaching a power lead to the start of your 4-pin RGB Flexible LED Strip Lights without any soldering. The intuitive snap-down design ensures a secure grip on the strip's contacts, providing stable power for vibrant, consistent color. Available for both 10mm and 12mm wide strips, this solderless connector simplifies installations, saving you time and effort on both DIY and professional projects. It's an essential part of our LED light accessories collection for anyone looking to create a professional, long-lasting setup.

Key Features

Effortless Solderless Connection

Features a simple snap-shut clasp that creates a secure electrical connection in seconds, eliminating the need for soldering.

Dual PCB Width Compatibility

Available in two sizes to perfectly fit standard 10mm or wider 12mm 4-pin RGB LED light strips.

Secure & Reliable Contact

Internal contact pins pierce the strip's copper pads, ensuring a firm, stable connection that prevents flickering and color errors.

Ready for Wiring

The 12cm (4.72") cable comes with pre-tinned wire ends, ready to be connected to an RGB controller or low-voltage power source.

Ideal for Project Starts

Specifically designed as a strip-to-wire connector to easily add a power lead to the beginning of any custom LED strip installation.

Close-up of the 4-pin single-end quick connector for RGB LED strips.

Product Specifications

Parameter	Details
Model	RGB-ACCESSORIE-007
Product Type	Single-End, Strip-to-Wire Quick Connector
Pin Configuration	4-Pin (For RGB Strips)
Compatible PCB Width	10mm (0.39in) or 12mm (0.47in) - Selectable
Cable Length	12 cm (approx. 4.72 inches)
Connection Method	Solderless, Snap-On Clasp
Housing Material	PVC Plastic
Contact Material	Copper
Voltage Application	For Low Voltage DC LED Systems

Application Scenarios

DIY Home Lighting Projects The perfect accessory for creating custom-length under-cabinet, cove, or accent lighting. This connector allows you to easily attach power wires to your RGB strips for a clean, professional start to your installation.

Retail & Display Case Lighting Quickly and efficiently set up dynamic color-changing lighting in display cases, on shelving, or for sign backlighting. The solderless design speeds up multi-unit installations without specialized tools.

Custom LED Fixture Assembly Use this as a reliable starting pigtail when building your own linear fixtures or integrating RGB strips into furniture, entertainment centers, or architectural elements.

How to Use This 4-Pin Solderless Connector

First, ensure you have selected the correct connector size (10mm or 12mm) to match the width of your LED strip.
Make sure the power is off. Cut your RGB LED strip cleanly along a designated copper cut line.
Gently pry open the white clasp on the connector.
Carefully slide the end of the LED strip into the connector, ensuring the four copper pads on the strip slide directly underneath the four contact pins inside.
Press the clasp down firmly until it snaps shut. This action pierces the strip's contacts and secures it in place.
Connect the tinned wire ends to the appropriate terminals on your 4-pin RGB controller or power adapter, ensuring correct polarity alignment.

⚠ Precautions

This connector is designed for 4-pin RGB LED strips. It is not compatible with 2-pin single color, 5-pin RGBW, or other strip types.
This is a strip-to-wire connector, intended to create a power lead. It cannot be used to join two strips end-to-end.
Ensure the copper pads on the strip are clean and free of any silicone coating before insertion.
This product is intended for indoor use in dry locations. For damp environments, the connection point must be sealed with silicone or waterproof heat shrink.

What's in the Box

✓1 x 4-Pin Single-End Quick Connector for RGB LED Strips (12cm)

Frequently Asked Questions

Q: Do I need any tools to use this 4 pin led strip connector?

A:No tools are required. This is a solderless connector that uses a simple snap-down mechanism to secure the LED strip.

Q: Will this connector work with my 10mm wide RGB strip light?

A:Yes, it will. This connector is available in two sizes; simply select the 10mm option from the dropdown menu before adding to your cart.

Q: What is the primary purpose of this connector?

A:It is a strip-to-wire connector. Its purpose is to add a 12cm wire lead to the beginning of a 4-pin RGB LED strip, allowing you to easily connect it to a controller or power supply.

Q: Is this connector waterproof?

A:No, this model is designed for indoor, dry locations. If used in a damp environment, the connection must be independently waterproofed with silicone sealant and/or heat shrink tubing.

Q: Can I use this to link two RGB strips together?

A:This model is not designed for that. This is a single-end connector for creating a power lead. To join two strips, you will need a strip-to-strip connector from our 4-pin accessories category.

Q: How do I ensure the polarity is correct?

A:Align the copper pads on your LED strip directly under the connector's metal pins. While wire colors can vary, typically the '+' marking on the strip should align with the designated positive wire on the connector cable.

4pin Single end quick connector RGB Flexible LED Strip Lights Fast Wire Cable Accessories Lenght 12cm