Spec Sheet - RGB-ACCESSORIE-012

Select Colour:	Black (Base), transparent (Base)
Select PCB Width:	8mm (0.31in) (Base), 10mm (0.39in) (Base), 5mm (0.2in) (Base), 4mm (0.157in) (Base), 15mm (0.59in) (Base), 20mm (0.79in) (Base), 30mm (1.18in) (Base), 12mm (0.47in) (Base), 40mm (1.57in) (Base), 6mm (0.23in) (Base), 3mm (0.12") (Base)
Availability	In Stock
Condition	Brand New

10cm Weatherproof Heat Shrink Tubing for RGB LED Strip Connectors

Anti-Oxidation IP67 Waterproof DIY Friendly

Product Description

Protect your LED lighting investments with our premium Heat Shrink Tubing Sleeves. This 10cm accessory is specifically designed to reinforce and waterproof the connection point between 4-pin RGB LED strips and their solderless connectors.

Standard solderless connectors are convenient but can be sensitive to movement, dust, and moisture. By applying this heat-shrink sleeve, you create a seamless, professional-grade seal that ensures your RGB lights remain stable in both indoor and outdoor environments.

Key Features & Details

Dual-Wall Technology: Each tube features an internal hot-melt adhesive lining. When heated, the glue melts and flows into the connector gaps, creating a 360-degree moisture barrier.
Connector Reinforcement: Effectively prevents solderless clips from accidentally popping open due to tension or vibration.
High Shrink Ratio: Fits easily over bulky connectors and shrinks tightly onto the thin LED strip and wires for a clean finish.
Industrial Grade Material: Made from cross-linked polyolefin that is UV-resistant and flame-retardant, perfect for long-term outdoor use.

Specifications Table

Parameter	Details
Product Category	LED Accessory - Protective Heat Shrink Sleeve
Compatible PCB Widths	3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 30mm, 40mm
Available Colors	Black, White, Transparent
Length	10cm (4.0 inches)
Protection Rating	Up to IP67 (After proper shrinking)
Material	Polyolefin with Hot-Melt Adhesive Inner Layer
Working Temperature	-45°C to +125°C

Application Scenarios

This accessory is essential for any scenario where the LED connection is exposed to the elements:

Outdoor Landscaping: Protecting RGB connectors on garden paths, patios, or pergolas.
Commercial Signage: Ensuring reliability in outdoor light boxes and channel letters.
Kitchen & Bath: Shielding connections from high humidity, steam, and splashing water.
Marine/RV: Providing vibration resistance and salt-mist protection for vehicle accent lighting.

Installation Tips & Precautions

How to Install:

Slide the 10cm tube onto the LED strip or wire before making the connection.
Secure your 4-pin RGB solderless connector onto the strip.
Slide the tube back to cover the entire connector centrally.
Use a heat gun (150°C-200°C) to shrink the tube until the adhesive is slightly visible at the edges.

Important Precautions:

1. Test First: Always verify that all RGB colors work correctly before applying heat.

2. Heat Control: Do not focus heat on one spot for too long to avoid damaging the LED strip.

3. Size Selection: Ensure the tube width matches your LED strip width for the best seal.

Weatherproof Solderless Heat Shrink Tubing Connector For RGB Flexible LED Light Strips, 10cm by sale