Spec Sheet - RGB-ACCESSORIE-COB01

Availability	In Stock
Condition	Brand New

Achieve flawless, reliable connections for your lighting projects with the COB Single End 4-Pin LED Strip Connector. Specifically engineered for 10mm wide COB RGB LED light strips, this connector solves the unique challenge of powering dotless COB technology. Unlike traditional SMD strips, COB strips require a specialized connection that can reliably contact the circuit through the continuous phosphor coating. This solderless connector uses sharp, insulation-piercing contacts to create a secure electrical link, eliminating the need for tedious soldering and ensuring a stable connection to your power source or controller. Its transparent, low-profile design minimizes shadows and integrates seamlessly into your lighting setup, making it an essential tool for both DIY enthusiasts and professional installers creating custom-length RGB accent lighting.

Key Features

COB-Specific Design

Engineered with piercing contacts to establish a secure connection on 10mm COB RGB strips without soldering.

Solderless Installation

Features a simple snap-shut clasp for a quick, tool-free, and reliable strip-to-wire connection in seconds.

4-Pin RGB Compatibility

Perfectly matches the 4-conductor layout of standard 10mm RGB COB strips for full color control.

Secure & Reliable Hold

The robust clasp locks the strip firmly in place, preventing accidental disconnection and ensuring stable performance.

Transparent Housing

A clear, compact body minimizes shadows and visual intrusion, maintaining the clean look of your lighting installation.

Technical Highlights

Specialized for IP20 non-waterproof 10mm COB RGB LED strips.
Insulation-piercing contact points ensure a solid connection through the phosphor layer.
Enables strip-to-wire connections for powering cut sections of COB tape.

Product Specifications

Parameter	Details
Model	RGB-ACCESSORIE-COB01
Product Type	Single End, Strip-to-Wire Connector
Pin Quantity	4
Compatible Strip Type	COB RGB LED Light Strips
Compatible Strip Width	10mm
Compatible IP Rating	IP20 (Non-Waterproof)
Connection Method	Solderless, Insulation-Piercing Clamp
Housing Material	Polycarbonate
Contact Material	Copper
Housing Color	Transparent

Application Scenarios

Custom Under Cabinet Lighting Easily create custom-length runs of COB RGB lighting under kitchen cabinets or shelves. This connector allows you to cut the strip to the exact size needed and attach a power lead without soldering, ensuring a clean and professional finish.

Architectural Cove & Accent Lighting Perfect for installing seamless, dot-free RGB accent lighting in ceiling coves, display cases, or behind media centers. The single-end connector makes it simple to power segments of RGB COB LED strip lights from a hidden power source.

DIY Lighting Fixtures & Signage An essential component for makers and hobbyists building custom light fixtures or illuminated signs. This connector provides a fast and reliable way to wire your COB strips to various RGB LED controllers for dynamic effects.

How to Use This Connector

Ensure your 10mm COB RGB strip is cut cleanly along the designated cut line.
Open the transparent cover of the connector clasp.
Gently slide the end of the LED strip into the connector, making sure it goes under the metal contact pins.
Verify polarity. Align the '+', 'R', 'G', and 'B' markings on the strip with the corresponding channels on the connector.
Firmly press down on the transparent cover until it snaps securely shut. This action pierces the strip to make the connection.
Give a light tug on the strip and wires to confirm the connection is secure before installing.

⚠ Precautions

This connector is designed exclusively for 10mm wide, 4-pin COB RGB LED strips. It is not compatible with SMD strips or other widths/pin counts.
For use with IP20 non-waterproof LED strips in dry, indoor locations only.
Always double-check the polarity (+, R, G, B) before closing the clasp to prevent damage to your LED strip.
Ensure the power is off during installation.

What's in the Box

✓1 x COB Single End LED Strip Connector (4-Pin, 10mm)

Frequently Asked Questions

Q: Will this 4 pin connector work with standard 5050 or 2835 SMD RGB strips?

A:No, this connector is specifically designed for the unique structure of COB LED strips. Its piercing pins are necessary to make contact through the phosphor coating, which is different from how SMD connectors work.

Q: Is this connector waterproof?

A:This model is for IP20 non-waterproof strips and should only be used in dry, indoor environments.

Q: Can I use this to connect two COB strips together?

A:No, this is a single-end, strip-to-wire connector designed to add a power lead to the end of a strip. For connecting two strips, you would need a strip-to-strip connector.

Q: Do I need any special tools for installation?

A:No tools are required. This is a solderless connector with a simple snap-down clasp for easy installation.

Q: How do I ensure I'm connecting the polarity correctly?

A:Your COB strip should have markings for +, R, G, and B. You must align these markings with the corresponding wire colors or indicators on the connector side before closing the clasp.

Q: Why do I need a special connector for COB strips?

A:COB strips have a continuous, smooth surface without exposed copper pads like SMD strips. This connector has sharp pins that safely pierce the strip to make a reliable electrical connection.

COB Single End LED Strip Connector 4 Pin For 10mm COB RGB LED Light Strips