Spec Sheet - E1-L+EB/EB(C)

Select Type:	E1-L + EB(C) (Base)
Availability	In Stock
Condition	Brand New

EB is discontinued, there is only EB(C) in stock.

● Input connects with 9 kinds of sensor detector optional, output connected directly to the low voltage LED strip.

● Max 8A output current, max output power 384W@48V.

● PIR motion sensor: when people or objects enter the sensitive field, the light turns on; when this exit the sensitive field, the light turns off after 30 seconds.

● Touch sensor: short touch to turn on or turn off light; long touch to dim up or down.

● Door sensor: when the door opens, or no obstacle ahead, the light turns on gradually; when the door close, or an obstacle ahead, the light turns off gradually.

● Hand sweep sensor: when hand sweep, the light turns on gradually; when hand sweep again, the light turns off gradually.

● 3 kinds of microwave motion detectors: turn on the light upon detection of motion, and turn it off after a pre-selected hold time when there is no movement, without dimming, with dimming, and two-step dimming function respectively.

● All microwave motion detectors, built-in daylight sensors, detection area, time delay, and daylight threshold can be set via a knob potentiometer for each specific application.

Please note: We will send you the EB sensor by default, if you EB(C) sensor, you can write in the special instuction area.

Technical Parameters

Input and Output

Input Voltage: DC12-48V

Output Voltage: DC12-48V

Output Power: 96W/192W/288W/384W (12V/24V/36V/48V)

Output Type: Constant voltage

Input Current: 8.1A

Output current: 8A

Warranty and Protection

Warranty: 5 years

Environment