E1-L DC12-48V Constant Voltage Sensor LED Dimmer

Features

● Input connects with 9 kinds of sensor detector optional, output connected directly to the low voltage LED strip.

● Max 8A output current, max output power 384W@48V.

● PIR motion sensor with ER Model: when people or objects enter the sensitive field, the light turns on; when this exit the sensitive field, the light turns off after 30 seconds.

● Touch sensor with EC Model: short touch to turn on or turn off light; long touch to dim up or down.

● Door sensor with ED Model or ED(C) Model: when the door opens, or no obstacle ahead, the light turns on gradually; when the door close, or an obstacle ahead, the light turns off gradually.

● Hand sweep sensor with EB Model or EB(C) Model: when hand sweep, the light turns on gradually; when hand sweep again, the light turns off gradually.

● 3 kinds of microwave motion detectors (EM1, EM2, EM3 Models): turn on the light upon detection of motion, and turn it off after a pre-selected hold time when there is no movement, without dimming, with dimming, and two-step dimming function respectively.

● All microwave motion detectors, built-in daylight sensors, detection area, time delay, and daylight threshold can be set via a knob potentiometer for each specific application.

 

Technical Parameters

Input and Output

Input Voltage: DC12-48V

Output Voltage: DC12-48V

Output Power: 96W/192W/288W/384W (12V/24V/36V/48V)

Output Type: Constant voltage

Input Current: 8.1A

Output current: 8A

 

Warranty and Protection

Warranty: 5 years

 

Environment

Operation Temperature Ta: -30℃~+55℃

Case temperature (Max.): Tc: +85℃

IP Rating:  IP20

 

Safety and EMC

EMC Standard (EMC): ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-17 V3.2.4

Safety Standard(LVD): EN 62368-1:2020+A11:2020

Certification: CE,EMC,LVD

Specifications Download    

 

Standards and Certifications