Spec Sheet - E1-S

Availability	In Stock
Condition	Brand New

Product Features

● RF AC phase-cut trailing edge dimmer, to dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights.

● Input connect with 9 kinds of sensor detector optional.

● Match with RF 2.4G dimming remote control optional, except PIR motion sensor input.

● Each Triac dimmer can also work as Sensor - RF signal converter, controlling one or more another RF LED controller synchronously.

● PIR motion sensor: when people or objects enter the sensitive field, the light turns on; when this exit the sensitive field, the light turns off after 30 seconds.

● Touch sensor: short touch to turn on or turn off light; long touch to dim up or down.

● Door sensor: when the door opens, or no obstacle ahead, the light turn on gradually; when the door close, or obstacle ahead, the light turns off gradually.

● Hand sweep sensor: when hand sweep, the light turn on gradually; when hand sweep again, the light turns off gradually.

● 3 kinds of microwave motion detector: turn on the light upon detection of motion, and turn off after a pre-selected hold time when there is no movement, without dimming, with dimming and two-step dimming function respectively.

● All microwave motion detectors, built-in daylight sensors, detection area, time delay,s and daylight thresholds can be set via knob potentiometer for each specific application.

● Min brightness can be set by key.

● Light on/off fade time 3s selectable.

● Easy to be placed in a standard wall junction box.

● Over-heat / Over-load protection, recover automatically.

Technical Parameters

Input and Output

Input Voltage: AC100-240V

Output Voltage: AC100-240V

Output Power: 150-360W

Input Signal: Sensor + RF 2.4GHz

Input Current: Max 1.5A

RF Control Distance: 30m