| Select Input Voltage: | 110V±20% (US, CA) (Base), 220V±20% (EU, UK, AU) (Base) |
|---|---|
| Select Plug Type: | US (Base), UK, EU (Base), AU |
| Select Power: | 30W, 50W, 200W, 100W, 10W - Only 110V (Base) |
| Wavelength: | 395nm (Base) |
| Availability | In Stock |
| Condition | Brand New |
10W/30W/50W/100W/200W Waterproof IP66 UV Black Light Outdoor LED Floodlight.
395 wavelength
Cold light source, no heat radiation, low temperature rise on the surface of the object to be illuminated, solving the traditional thermal damage problem
Advanced aluminum heatsink for extended life
Tempered glass, excellent light transmittance
Smart power IC for enhanced stability
120-degree large light-emitting angle, large lighting range
IP66 waterproof rating for outdoor use
180 degrees to adjust the light angle at will
The maximum installation height is 3.5 meters
AC85-265V working voltage
Working temperature -20℃~45℃
Applications: UV glue curing, Ink & paint fast drying, Electronic parts bonding, Glass & Metal Bonding
Instructions for use: positioning in 5 seconds, complete curing in 2 minutes. Wavelength 395 uniformly corresponds to the wavelength standard of UV glue. The LED UV lamp needs to be as close to the surface of the cured object as possible. The closer the distance, the better. It is best to keep it within a distance of 0.5-1 cm. Too far irradiation distance will seriously affect the curing effect. Consider the actual irradiation range and purchase a UV flood light with the corresponding wattage.
Note: 1) The wavelength of the light curing agent contained in the UV glue must be the same as the wavelength of the UV floodlights. 2) The energy of the UV LED floodlight must meet the energy required for curing the UV glue, and the energy of the ultraviolet light is proportional to the power of the lamp.
Standards and Certifications
