| Availability | In Stock |
|---|---|
| Condition | Brand New |
EM1 is replaced by EMR now.
● Active microwave motion detectors with HF system 10.525GHz, motion can be detected through plastic, glass and thin non-metal materials.
● Built-in motion sensor and daylight sensor.
● Powered by low voltage 9-24VDC, output 5V level or PWM signal.
● Detection area, time delay and daylight threshold can be set via knob potentiometer for each specific application.
● Wide detection area, range up to 20m in diameter.
● Support higher mounting height 15m Max.
Technical Parameters
Working voltage: 9-24VDC
HF system: 10.525GHz
Power consumption: < 0.5W(Standby) , <1W(Operation)
Detection zone Max.(DxH): 20 x 15m
Detection sensitivity: 10%/25%/50%/75%/100%
Hold time: 10s/30s/90s/3min/10min/20min/30min
Daylight threshold: 10lux/30lux/50lux/100lux/150lux/200lux/Disable
Mounting height: 15m Max.
Motion detection: 0.5-3m/s
Detection angle: 150°(wall installation), 360°(ceilling installation)
This sensor is a motion switch without dimming function, which turn on the light upon detection of motion, and turn off after a pre-selected
hold time when there is no movement.
1. With sufficient ambient light, the sensor does not turn on the light.
2. With insufficient ambient light, the sensor turn on the light when motion is detected.
3. After hold time, the light turns off if no motion detected.
Specifications Download 
Standards and Certifications
