EM2 Dimmable Microwave Motion Sensor Switch - Replaced By EM

EM2 is replaced by EMR now. 

 

Product Features

● Active microwave motion detectors with HF system 10.525GHz, motion can be detected through plastic, glass and thin non-metal materials.

● Built-in motion sensor and daylight sensor.

● Powered by low voltage 9-24VDC, output 5V level or PWM signal.

● Detection area, time delay and daylight threshold can be set via knob potentiometer for each specific application.

● Wide detection area, range up to 20m in diameter.

● Support higher mounting height 15m Max.

 

Technical Parameters

Working voltage: 9-24VDC

HF system: 10.525GHz

Power consumption: < 0.5W(Standby) , <1W(Operation)

Detection zone Max.(DxH): 20 x 15m

Detection sensitivity: 10%/25%/50%/75%/100%

Hold time: 10s/30s/90s/3min/10min/20min/30min

Daylight threshold: 10lux/30lux/50lux/100lux/150lux/200lux/Disable

Mounting height: 15m Max.

Motion detection: 0.5-3m/s

Detection angle: 150°(wall installation), 360°(ceilling installation)

 

This sensor is a motion switch with dimming function, which turn on the light and dim up to expected brightness level upon detection of motion, and turn off after a pre-selected hold time when there is no movement.

1. The sensor turn on the light and dim up to expected brightness level when motion is detected.

2. After hold time, the light turn off if no motion detected.

 

Specifications Download    

Standards and Certifications