Go to Top
SuperLightingLED
SUPERLIGHTINGLED CO., LTD
Web: www.superlightingled.com
Email: [email protected]
Date: 2026-10-23 | ID: 5224

12mm COB RGBW LED Strip 5 Pin Connector - Strip to Wire Type

MODEL: COB-RGBW-ACCESSORIE-1
Price based on selections below:
$1.29
Select Connector Type:Wire with 2+3 pin type connector (Base), Wire with 3+2 pin type connector (Base)
AvailabilityIn Stock
ConditionBrand New
Technical Specifications

Create custom-length RGBW lighting projects with ease using our 12mm 5-Pin Strip-to-Wire Connector, designed exclusively for non-waterproof IP20 COB RGBW led strips. This essential accessory allows you to quickly and reliably connect a cut section of a COB RGBW strip to the bare wires leading to your controller, without any soldering required.

Its unique insulation-piercing design establishes a secure connection by simply clamping down on the PCB strip, making it the ideal solution for DIY enthusiasts and professionals who need to bridge the gap between their custom-cut COB strip and an RGBW controller.

12mm cob rgbw led strip 5 pin connector

Key Features

Exclusive COB Compatibility

Engineered specifically for the flat, continuous surface of 12mm wide, 5-pin RGBW COB LED strips, ensuring a perfect fit and solid electrical contact.

Effortless Solderless Connection

Features a quick-clasp, insulation-piercing mechanism that eliminates the need for soldering, dramatically speeding up installation and repairs.

Strip-to-Wire Functionality

Provides a seamless transition from a COB LED strip to five bare lead wires, ready for direct connection to an RGBW controller or power supply.

Flexible Pin Configurations

Available in two distinct wiring types (Wire with 3+2 pin or 2+3 pin connector) to precisely match your specific RGBW COB strip layout.

Product Specifications

Parameter Details
Model COB-RGBW-ACCESSORIE-1
Product Type Strip-to-Wire Connector
Compatible Strip 12mm wide, 5-Pin RGBW COB LED Strips
Incompatible Strip SMD LED Strips, Waterproof Strips, other widths
Pin Count 5
Connection Method Solderless, Insulation Piercing
Wire Length Approx. 15cm / 5.9 inches
Connector Material Plastic + Copper
Recommended Use Single-use only
IP Rating IP20 (For indoor, dry locations)

Application Scenarios

Custom Length Lighting Perfect for projects requiring precise strip lengths, such as under-cabinet task lighting, cove accent lighting, or backlighting for displays. This connector allows you to use every piece of your strip, minimizing waste and ensuring a clean installation.
Controller & Power Integration Use this connector as the crucial link between the end of your custom-cut COB strip and the input terminals of your 5-channel RGBW controller. It simplifies wiring, enabling full control over your strip's color-changing and white light capabilities.

How to Use This COB Strip Connector

  1. Ensure all power is disconnected before starting.
  2. Cut your 12mm RGBW COB LED strip cleanly along a designated cut line.
  3. Carefully slide the end of the COB strip into the connector. Make sure the 5 copper pads on the strip align perfectly with the 5 metal pins inside.
  4. Firmly press the metal pins down until it snaps securely shut. This action drives the pins through the strip's backing to make contact.
  5. Connect the 5 bare wires on the other end to the corresponding terminals (+, R, G, B, W) on your RGBW controller or power source.
  6. Reconnect power and test the connection to ensure all colors and the white channel illuminate correctly.

12mm cob rgbw led strip 5 pin connector strip to wire type

⚠ Precautions
  • This connector is designed exclusively for 12mm wide, 5-pin RGBW COB LED strips. It is NOT compatible with any SMD LED strips or other strip widths.
  • The piercing mechanism is for SINGLE USE ONLY. Once the clasp is closed, it cannot be reliably reopened and reused as the pins may be damaged.
  • Double-check that the polarity and wire order (+, R, G, B, W) of your strip match your controller's output before finalizing the connection.
  • This is an IP20-rated connector and should only be used in dry, indoor environments.

Frequently Asked Questions

Q: Can I use this connector with a 8mm wide RGBW strip?

A:No, this connector is specifically molded and pinned for 12mm wide RGBW COB strips. Using it with other sizes will result in a poor or failed connection.

Q: Why is this connector only for single use?

A:It uses sharp pins that pierce the LED strip's circuit board to make a reliable connection. Reopening it can damage these delicate pins and the strip, preventing a secure second connection.

Q: Will this work with standard SMD 5050 RGBW strips?

A:No, this connector is engineered for the flat, uniform surface of COB (Chip-on-Board) LED strips and will not make proper contact with the raised components of SMD strips.

Q: What is the difference between the '3+2 pin' and '2+3 pin' types?

A:This refers to the physical grouping of the pins within the connector housing. Please check the layout of your specific RGBW COB strip's contact pads to ensure you select the matching connector type for a proper fit.

© 2026 SuperLightingLED. All specifications are subject to change without notice.